Abstract:Achieving high mechanical strength and ductility in age-hardenable Al7000 series (Al–Zn–Mg) alloys fabricated by selective laser melting (SLM) remains challenging. Here, we show that crack-free AlZnMgCuScZr alloys with an unprecedented strength–ductility synergy can be fabricated via SLM and heat treatment. The as-built samples had an architectured microstructure consisting of a multimodal grain structure and a hierarchical phase morphology. It consisted of primary Al3(Sc x ,Zr1− x ) particles which act as inoculants for ultrafine grains, preventing crack formation. The metastable Mg-, Zn-, and Cu-rich icosahedral quasicrystals (I-phase) ubiquitously dispersed inside the grains and aligned as a filigree skeleton along the grain boundaries. The heat treated SLM-produced AlZnMgCuScZr alloy exhibited tunable mechanical behaviors through trade-off among the hierarchical features, including the dual-nanoprecipitation, viz, η′ phase, and secondary (Al,Zn)3(Sc9Zr), and grain coarsening. Less coarsening of grains and (Al,Zn)3(Sc9Zr) particles, due to a reduced solution treatment temperature and time, could overwhelm the more complete dissolution of I-phase (triggering more η′ phase), resulting in higher yield strength. Optimal combination of the hierarchical features yields the highest yield strength (∼647 MPa) among all reported SLM-produced Al alloys to date with appreciable ductility (∼11.6%). The successful fabrication of high-strength Al7000 series alloys with an adjustable hierarchical microstructure paves the way for designing and fine-tuning SLM-produced aluminum engineering components exposed to high mechanical loads.

Additive manufacturing of a high strength Al-5Mg2Si-2Mg alloy: Microstructure and mechanical properties

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms

Microstructural evolution and strengthening mechanism of high-strength AlSi8.1 Mg1.4 alloy produced by selective laser melting

Microstructure and mechanical properties of Al-Fe-Sc-Zr alloy additively manufactured by selective laser melting

Thermal and mechanical properties of an Al-Mg-Sc-Zr high strength alloy fabricated by selective laser melting

Microstructure, metallurgical defects and hardness of Al–Cu–Mg–Li–Zr alloy additively manufactured by selective laser melting

A high-strength AlSiMg1.4 alloy fabricated by selective laser melting

On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties

Achieving high strength in selective laser melting AlSi10Mg alloy by adding microsized pure Cu particles

Si-Assisted Solidification Path and Microstructure Control of 7075 Aluminum Alloy with Improved Mechanical Properties by Selective Laser Melting

Microstructures and tensile properties of a selective laser melted Al–Zn–Mg–Cu (Al7075) alloy by Si and Zr microalloying

Selective laser melting of Al-3.48Cu-2.03Si-0.48Sc-0.28Zr alloy: Microstructure evolution, properties and metallurgical defects

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

Microstructural analysis and mechanical properties of AlSi10Mg alloy components produced via SLM

Comparison of AlSi7Mg0.6 alloy obtained by selective laser melting and investment casting processes: Microstructure and mechanical properties in as-built/as-cast and heat-treated conditions

Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation

Selective Laser Melting of Al-Cu-Mn-Mg Alloys: Processing and Mechanical Properties

Microstructure and mechanical properties of high strength AlCoCrFeNi2.1 eutectic high entropy alloy prepared by selective laser melting (SLM)

Cracking Behavior, Microstructure and Properties of Selective Laser Melted Al-Mn-Mg-Sc-Zr Alloy

Tensile property and microstructure of Al−4.77Mn−1.37Mg−0.67Sc−0.25Zr alloy under different selective laser melting processing parameters