Abstract:In this study, we developed a dynamic self-balanced electrochemical model to explore the intricate interplay between coupled heat-moisture transmission and the corrosion process of steel reinforcement in concrete structures. The model accounts for the diffusion, convection, and adsorption mechanisms of chloride ions in both the cement paste and interfacial transition zone (ITZ) phases. Additionally, it incorporates the balance between gaseous and dissolved oxygen, along with oxygen consumption during cathodic reactions. This framework allows for the dynamic self-balancing of macrocell and microcell, thus offering a comprehensive understanding of the non-uniform corrosion process under various environmental factors including temperature, humidity, chloride ions, and oxygen. To validate the model, we employed comprehensive monitoring approaches, coupled with artificial climate-accelerated corrosion experiments. These were designed to record variables such as temperature, humidity, oxygen concentration, and corrosion current density under time-varying environmental conditions. Our results indicate that while temperature within the concrete remains relatively uniform, humidity exhibits a non-uniform distribution. This non-uniformity in humidity is particularly noticeable at concrete cover surface, leading to convection and accumulation effects of chloride ions. Moreover, we observe a strong correlation between oxygen concentration and relative humidity. Corrosion current density for steel rebar is found to be higher at edge regions compared to central regions, owing to varying distances from the external soaking solution. The insights gained from this research offer valuable theoretical guidance for the design, construction, and maintenance of reinforced concrete structures, particularly those exposed to marine environments.

Non-uniform Corrosion of Steel in Mortar Induced by Impressed Current Method: an Experimental and Numerical Investigation

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

Study on Experimental Method and Morphology of Accelerated Non-Uniform Corrosion of Steel Bars

Evaluation of corrosion morphology on mechanical properties of reinforcing steel bars using numerical simulation and simplified analytical model

Simulation and Experimental Verification of the Non-Uniform Corrosion Cracking Process of Reinforced Mortar Specimen

Rust Distribution of Non-Uniform Steel Corrosion Induced by Impressed Current Method

Study of Wiring Method on Accelerated Corrosion of Steel Bars in Concrete

Experimental Study of the Modulus of Steel Corrosion in a Concrete Port

Study On Distribution Of Steel Corrosion Products In Concrete Structures

Study On Modulus Of Rust Applied In Steel Corrosion Induced Concrete Cracking Model

Dynamic Self-Balanced Electrochemical Model for Non-Uniform Corrosion of Steel Reinforcement in Concrete under Combined Effects of Heat-Moisture-chlorine-oxygen

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Applicability Study on Accelerated Corrosion Methods of Steel Bars in Concrete Structure

Mechanical Performance of Corroded Steel Bars in Concrete

Distribution of millscale on corroded steel bars and penetration of steel corrosion products in concrete

Fractal Characterization of Non-Uniform Corrosion of Steel Bars in Concrete Beams after Accelerated Depassivation and Seven-Year Natural Corrosion.

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Non-uniform distribution of rust layer around steel bar in concrete

EXPERIMENTAL STUDY OF PIEZOMAGNETISM OF PITTING CORROSIONSTEEL BARS UNDER TENSILE FORCE

A Comparison Study on the Natural and Half-Soaking Galvanic Accelerated Corrosion of Reinforced Concrete Based on an Improved Electrochemical Model

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD