Abstract:Based on the electrochemical mechanism of steel corrosion, an improved electrochemical model was established to numerically simulate the corrosion of reinforcement in concrete under marine environment. The corrosion potential distribution and current density of corroded reinforcement were deduced from the corresponding micro-environments on the surface of steel bar, including oxygen, chloride ions, temperature and relative humidity. The equilibrium of gaseous oxygen and dissolved oxygen in pore solution was considered in the model. And the diffusion of invasion mediums in cement matrix and interfacial transition zone (ITZ) were also taken into account. The anode and cathode areas on the surface of steel bar was determined by the time-varying distribution of chloride ions rather than a fixed ratio to achieve the self-balance between macrocell and microcell corrosion. The simulation results agree well with the experimental data. The numerical analysis indicates that the growth of environmental chloride ions concentration will enhance the non-uniformity of chloride ions distribution, but does not contribute much to the increase of maximum rust layer thickness on steel surface. In the propagation stage of corrosion, oxygen concentration is a key factor in controlling corrosion reactions compared to chloride ions. Moreover, environment temperature has a positive effect on both the range of active areas on surface of steel rebar and rust layer thickness.

Experimental Study of the Modulus of Steel Corrosion in a Concrete Port

Study On Modulus Of Rust Applied In Steel Corrosion Induced Concrete Cracking Model

Probability-Based Performance Degradation Model and Constitutive Model for the Buckling Behavior of Corroded Steel Bars

State-of-art of corrosion-induced cracking of reinforced concrete structures

Mechanical Performance of Corroded Steel Bars in Concrete

Study On Distribution Of Steel Corrosion Products In Concrete Structures

Experimental Study and Analytical Model of Concrete Cover Spalling Induced by Steel Corrosion

Distribution of millscale on corroded steel bars and penetration of steel corrosion products in concrete

A study of the elastic moduli of corrosion products using nano-indentation techniques

Corrosion-induced concrete cracking model considering corrosion product-filled paste at the concrete/steel interface

Crack shape and rust distribution in corrosion-induced cracking concrete

Monotonic and fatigue behavior of steel-concrete composite beams subjected to corrosion

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Analysis on steel corrosion at the cracking of concrete

Study on Experimental Method and Morphology of Accelerated Non-Uniform Corrosion of Steel Bars

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Prediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

Modeling the Amount of Steel Corrosion at the Cracking of Concrete Cover

Composition and expansion coefficient of rust based on X-ray diffraction and thermal analysis