Abstract:The evaluation of electromagnetic parasitics is important for electromagnetic interference within power electronics systems. Simple yet accurate physics-based lumped-circuit models of these parasitics can facilitate fast analysis and better understanding of the system performance. Methods exist to reduce complex electromagnetic models to much simpler representations but, while they speed up calculation, they do not preserve physicality. In this paper, a methodology is developed for obtaining a simplified SPICE circuit from a large-scale partial element equivalent circuit (PEEC) model, where there is a clear correlation between geometry and parasitic circuit elements. To preserve correlation between equivalent circuits and physical geometry, reduction is done first for inductance and resistance; then, reduction is performed for capacitance using nodes from the reduced LR model. The reduced model gives a better insight into the causes of and possible solutions to electromagnetic problems and can be used to improve the design. The method was validated on real power electronics geometries using frequency-dependent behavior of port impedances and admittances. The initial PEEC model for this example contained approximately 10 645 unknowns and was reduced to 195 elements. The calculated and measured impedances agree within 0.1 dB up to 200 MHz.

Broadband Lumped Circuit Parameter Extraction Method Based On Peec

A PEEC-Based Concise Broadband Physical Circuit Modeling Method with Parameter Extraction for PCB Inductive Components

Quasi-Static Derived Physically Expressive Circuit Model for Lossy Integrated RF Passives

Plane-pair PEEC method for impedance analysis of multi-slots power distribution network with experimental validation

A derived circuit model for spiral inductors on lossy silicon substrate

Electrothermal modeling of coaxial through silicon via (TSV) for three-dimensional ICs

A Physics-Aware Methodology for Equivalent Circuit Model Extraction of TSV-inductors

A Compact Circuit Model of On-Chip Multi-layer Spiral Inductors on Silicon Substrate

A Derived Physically Expressive Circuit Model For Integrated Passives In Rfic

Development of Simple Physics-Based Circuit Macromodel from PEEC

Investigation of Power Distribution Planes with Multi-Slots Using Plane-pair PEEC Method

Plane-Pair PEEC Modeling for Package Power Layer Nets with Inductance Extraction

An Efficient PEEC-Based Method for Full-Wave Analysis of Microstrip Structures

PEEC Modeling and Model Order Reduction of Magnetically Enhanced Planar Inductive Device

Broadband PEEC Model Study on Ferrite-core Inductive Devices of Switched Mode Power Supply

Modelling Of Planar Ebg Structure By Using Equivalent Circuit Method

Efficient DC and AC Impedance Calculation for Arbitrary-Shape and Multilayer PDN Using Boundary Integration

HF CIRCUIT MODEL OF CONDUCTED EMI OF GROUND NET BASED ON PEEC

The Simplifying For Peec Model Of Dc Bus Based On Parameter Sensitivity Analysis

An efficient finite element solution using a congruent transformation based model order reduction for interconnect simulation

Analysis of 3D-Substrate Coupling in RF- MEMS Inductors by Extended PEEC