Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

PEEC Modeling and Model Order Reduction of Magnetically Enhanced Planar Inductive Device

Quasi-Static Derived Physically Expressive Circuit Model for Lossy Integrated RF Passives

Novel SPICE Compatible Partial-Element Equivalent-Circuit Model for 3-D Structures

A derived circuit model for spiral inductors on lossy silicon substrate

A PEEC-Based Concise Broadband Physical Circuit Modeling Method with Parameter Extraction for PCB Inductive Components

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Precise Modeling of Inductive Wireless Power Transfer With Lossy Magnetic Sheets

A Novel Accurate PEEC‐based 3D Modeling Technique for RF Devices of Arbitrary Conductor‐magnet Structure

Extended Magpeec Model Including Dispersive Medium

Efficient Calculation of Near-Field from PDN Using Equivalent Magnetic Current Modal

L-Simulator: A Magpeec-Based New Cad Tool for Simulating Magnetic-Enhanced Ic Inductors of 3d Arbitrary Geometry

A New Modeling Technique For Simulating 3-D Arbitrary Conductor Magnet Structures For Rfic Applications

Analysis and Visualization of Magnetic Field for Multi-dimensional Helmholtz Coils Based on PEEC

Broadband PEEC Model Study on Ferrite-core Inductive Devices of Switched Mode Power Supply

An Efficient PEEC-Based Method for Full-Wave Analysis of Microstrip Structures

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

Investigation of Power Distribution Planes with Multi-Slots Using Plane-pair PEEC Method

Development of Simple Physics-Based Circuit Macromodel from PEEC

Plane-pair PEEC method for impedance analysis of multi-slots power distribution network with experimental validation

Analysis of Multilayer Structure Near- and Far-Field Radiation by the Coupled PP-PEEC and Field-Equivalence Principle Method

An efficient finite element solution using a congruent transformation based model order reduction for interconnect simulation