Abstract:This work reports a new simulated inductor which is suitable for a Contactless Electrical Tomography (CET) system and can effectively overcome the unfavorable influence of coupling capacitance on the measurement results. By detailed analysis and comparison, it is found that the grounded simulated inductor has a simple circuit construction but its output current is not equal to its input current, while the floating simulated inductor can be used as an independent inductor module but its circuit structure is relatively complex. A new simulated inductor is designed by compensating the currents from the common node of an introduced independent power source to the main circuit. The new simulated inductor combines the advantages of the grounded simulated inductor and the floating simulated inductor. It has the simple construction similar to that of the grounded simulated inductor and its input current is equal to the output current, which means it can be used as an independent module. The impedance measurement and practical image reconstruction experiments were carried out to verify the effectiveness of the new simulated inductor. The experimental results show that the design of the new simulated inductor is successful, and the performance of the impedance measurement is satisfactory. The signal-to-noise ratio of the CET system is improved. Meanwhile, the research work also indicates that in the case when the independent power source is not available, the new simulated inductor is also an effective alternative method. But the phase difference between input signal and output signal is approximately 90° when the elimination principle is realized.

L-Simulator: A Magpeec-Based New Cad Tool for Simulating Magnetic-Enhanced Ic Inductors of 3d Arbitrary Geometry

Simulation and Design of 3d Geometric Rf Ic Inductors by Novel Modeling Tecniques with Magpeec Plus Fastcap (invited Paper)

INTEGRAL EQUATION METHOD FOR SIMULATION OF MAGNETIC FIELD OF PERMANENT MAGNETIC SPHERICAL STEPPER

Magnetic Circuit Modeling of Dual-Armature Flux-Switching Permanent Magnet Machine

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Finite Element Simulation of Electromagnetic Properties of Ferrite Material

A Novel Accurate PEEC‐based 3D Modeling Technique for RF Devices of Arbitrary Conductor‐magnet Structure

A New Modeling Technique For Simulating 3-D Arbitrary Conductor Magnet Structures For Rfic Applications

Capacitance Extraction of Three-Dimensional Interconnects Using Element-By-Element Finite Element Method (Ebe-Fem) and Preconditioned Conjugate Gradient (pcg) Technique

A Physics-Aware Methodology for Equivalent Circuit Model Extraction of TSV-inductors

The Modeling Simulation of Magnetic-Coupled-Coils in Multisim 9.0

On the Design of a New Simulated Inductor Using a Contactless Electrical Tomography System As an Example

A derived circuit model for spiral inductors on lossy silicon substrate

A Nonlinear 3-D Hybrid Model for Surface-Mounted Permanent Magnet Machines Considering End Effect

"Smart" 3D Electromagnetic Modeling

Quasi-Static Derived Physically Expressive Circuit Model for Lossy Integrated RF Passives

A Compact Circuit Model of On-Chip Multi-layer Spiral Inductors on Silicon Substrate

COMBING MULTILEVEL GREEN'S FUNCTION INTERPOLATION METHOD WITH VOLUME LOOP BASES FOR INDUCTANCE EXTRACTION PROBLEMS

Asic Design of an Integrable Simulated Inductor with Huge Inductance

PEEC Modeling and Model Order Reduction of Magnetically Enhanced Planar Inductive Device

Development of an Inductor Design Tool Based on Multi-Objective Optimization and Finite Element Simulation