Abstract:The evaluation of electromagnetic parasitics is important for electromagnetic interference within power electronics systems. Simple yet accurate physics-based lumped-circuit models of these parasitics can facilitate fast analysis and better understanding of the system performance. Methods exist to reduce complex electromagnetic models to much simpler representations but, while they speed up calculation, they do not preserve physicality. In this paper, a methodology is developed for obtaining a simplified SPICE circuit from a large-scale partial element equivalent circuit (PEEC) model, where there is a clear correlation between geometry and parasitic circuit elements. To preserve correlation between equivalent circuits and physical geometry, reduction is done first for inductance and resistance; then, reduction is performed for capacitance using nodes from the reduced LR model. The reduced model gives a better insight into the causes of and possible solutions to electromagnetic problems and can be used to improve the design. The method was validated on real power electronics geometries using frequency-dependent behavior of port impedances and admittances. The initial PEEC model for this example contained approximately 10 645 unknowns and was reduced to 195 elements. The calculated and measured impedances agree within 0.1 dB up to 200 MHz.

Novel SPICE Compatible Partial-Element Equivalent-Circuit Model for 3-D Structures

Simulation Study of A Magnetocardiogram Based on A Virtual Heart Model: Effect of A Cardiac Equivalent Source and A Volume Conductor

Quasi-Static Derived Physically Expressive Circuit Model for Lossy Integrated RF Passives

PEEC Modeling and Model Order Reduction of Magnetically Enhanced Planar Inductive Device

A derived circuit model for spiral inductors on lossy silicon substrate

A Physics-Aware Methodology for Equivalent Circuit Model Extraction of TSV-inductors

A SPICE-compatible Full-Wave Equivalent Circuit Model for Printed Circuit Structure Analysis

"Smart" 3D Electromagnetic Modeling

A New Modeling Technique For Simulating 3-D Arbitrary Conductor Magnet Structures For Rfic Applications

Electrothermal modeling of coaxial through silicon via (TSV) for three-dimensional ICs

A Nonlinear 3-D Hybrid Model for Surface-Mounted Permanent Magnet Machines Considering End Effect

An Equivalent Circuit Model with Current Return Path Effects for On-Chip Interconnect Up to 80 Ghz

A Novel Accurate PEEC‐based 3D Modeling Technique for RF Devices of Arbitrary Conductor‐magnet Structure

Analysis of Multilayer Structure Near- and Far-Field Radiation by the Coupled PP-PEEC and Field-Equivalence Principle Method

Extended Magpeec Model Including Dispersive Medium

L-Simulator: A Magpeec-Based New Cad Tool for Simulating Magnetic-Enhanced Ic Inductors of 3d Arbitrary Geometry

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

An Efficient PEEC-Based Method for Full-Wave Analysis of Microstrip Structures

Efficient Calculation of Near-Field from PDN Using Equivalent Magnetic Current Modal

Development of Simple Physics-Based Circuit Macromodel from PEEC