Bulk dense Ba4Ti13O30 ceramics prepared by mixed-phase two-step sintering method
Zeying Zhao,Jiaqiang Wang,Ziang Gao,Dengren Jin
DOI: https://doi.org/10.1007/s10854-024-12462-2
2024-04-06
Journal of Materials Science Materials in Electronics
Abstract:Bulk dense and fine-grained single-phase Ba 4 Ti 13 O 30 ceramic was successfully prepared by the mixed-phase two-step sintering (MP-TSS) method, and its dielectric properties and microwave performance were characterized in this paper. Influences of the solid-phase reaction on the sintering behavior of the mixed-phase sintering were explored during the first-step sintering. Effects of the first-step sintering regime, especially including the holding time at high temperatures, on the final quality of the ceramics were investigated by examining the density and microstructure at the end of the first step. Results showed that a rapidly completed solid-phase reaction and the formation of an equiaxed fine-grained microstructure were favorable for the MP-TSS method to obtain ceramics with high densities. The higher the density at the end of the first-step sintering in the MP-TSS process without significant grain growth, the more favorable it was for producing final high-density ceramics. The specimens sintered at 1230 °C/2 h–1180 °C/12 h exhibit optimal dielectric and microwave properties. Their dielectric constant and dielectric loss at 1 MHz are 50 and 0.0005, respectively, and the quality factor and temperature coefficient of resonant frequency at microwave are 43,550 and 39.4 ppm/°C, respectively. These findings aid in saving time for optimizing the TSS regime and producing ceramics using the TSS technology. The first-step holding time in the TSS process offers a technological choice of tuning the initial morphology of the second-step sintering to yield fully dense and fine-grained ceramics, and potentially expand the range of applications for TSS technology.
engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied