Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> BACKGROUND</h3><p>Selective catalytic reduction (SCR) of NO<sub>X</sub> has been the most widely used technique for the reduction of NO<sub>X</sub> emissions from combustion flue gas. MnO<sub>X</sub>/FeO<sub>X</sub> based catalysts typically can attain high NO<sub>X</sub> conversion at low temperature but inferior water vapor resistance. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> RESULTS</h3><p>A MnO<sub>X</sub>/FeO<sub>X</sub> catalyst was synthesized by the sonicated co‐precipitation method and then wash‐coated on ceramic cordierite monoliths to form a low pressure drop monolithic catalyst suitable for high flowrate flue gas treatment conditions. The catalyst achieved above 90% NO conversion at a gas hourly space velocity (GHSV) of 30,000 h<sup>‐1</sup> over a 125‐225 °C temperature window under simulated industrial flue gas conditions. In the presence of up to 5% H<sub>2</sub>O vapor, comparable performance was retained for a reduced temperature window of ≥150 °C. In order to improve water resistance and LT‐SCR performance, an optimal 10% w/w PTFE doped MnO<sub>X</sub>/FeO<sub>X</sub> catalyst was developed, which exhibited remarkably high performance of up to 98% NO conversion, with improved water resistance at up to 10% v/v H<sub>2</sub>O while retaining high performance from 100 °C. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> CONCLUSION</h3><p>Monolithic MnO<sub>X</sub>/FeO<sub>X</sub> catalyst incorporating PTFE significantly improved NO conversion and water vapour resistance due to the enhanced NH<sub>3</sub> adsorption associated with Lewis acid sites and water repellent property. These findings will provide guidance for researchers in this field to adapt F based or similar additives into the making of high performance and high water resistance catalysts either to retrofit existing catalyst synthesis procedures or reinvent a novel catalyst at scalable but economical way. </p><p>This article is protected by copyright. All rights reserved.</p></section>

Preparation of Honeycombed Holmium-Modified Fe-Mn/TiO2 Catalyst and Its Performance in the Low Temperature Selective Catalytic Reduction of NOx

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Activation of Fast Selective Catalytic Reduction of NO by NH3 at Low Temperature over TiO2 Modified CuOX-CeOX Composites

Ho-modified Mn-Ce/TiO2 for low-temperature SCR of NOx with NH3: Evaluation and characterization

Improvement of sulfur and water resistance with Fe-modified S-MnCoCe/Ti/Si catalyst for low-temperature selective catalytic reduction of NO with NH3

Effect of Preferential Exposure of Anatase TiO2 {0 0 1} Facets on the Performance of Mn-Ce/TiO2 Catalysts for Low-Temperature Selective Catalytic Reduction of NOx with NH3

Synthesis and characterisation of monolithic PTFE ‐modified MnO X / FeO X catalysts for selective catalytic reduction ( SCR ) of NO X at low temperature

Preparation of Cr-Mn Mixed Oxide by Coprecipitation and Its Performance for Low-Temperature Selective Catalytic Reduction of NOx

Improved Low Temperature NH3-SCR Performance of FeMnTiO(x) Mixed Oxide with CTAB-assisted Synthesis.

Fe-Mn/Al2O3 Catalysts for Low Temperature Selective Catalytic Reduction of NO with NH3

Effect of Fe Reduced-Modification on TiO 2 Supported Fe–Mn Catalyst for NO Removal by NH 3 at Low Temperature

Titania-Samarium-Manganese Composite Oxide for the Low-Temperature Selective Catalytic Reduction of NO with NH3

Performance of Low-temperature SCR of NO with NH3 over MnOx/Ti-based catalysts

Study on H2O2, Ce, W modified MnO /TiO2 based NH3-SCR Catalyst: The status and effect of doped promoters and synergies

Synthesis, Characterization and Catalytic Performance of Femntiox Mixed Oxides Catalyst Prepared by A Ctab-Assisted Process for Mid-Low Temperature Nh3-Scr

High Resistance of SO2 and H2O over Monolithic Mn-Fe-Ce-Al-O Catalyst for Low Temperature NH3-SCR

Novel Homogeneous and Mesoporous MnOx-Doped Ceria Nanosheets As Catalysts for Low-Temperature Selective Catalytic Reduction

Removal of NOx using novel Fe-Mn-Ti compound catalysts at low temperature

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

Tunable Highly Dispersed Nia-xMnxAlOy Catalysts Derived from Layered Double Oxide for Low Temperature NOx Removal