Abstract:BACKGROUND The emission of NOx can causes serious environmental pollution and endangers human health. In recent years, the selective catalytic reduction of NO with NH3 (NH3-SCR) technology has been widely studied and adopted to reduce the production and emissions of NOx during many technologies. RESULTS A series of Mn-Ce-Co-x/Ti-C,N catalysts were prepared by the impregnation method, and low-temperature NH3-SCR was studied. The results show that support modification (Ti-C,N) can broaden the operation temperature window of the catalyst (NO conversion >95%: Mn-Ce/TiO2 catalyst, 160-320 degrees C; Mn-Ce/Ti-C,N catalyst, 140-320 degrees C). The doping of Co further improves the low-temperature NH3-SCR of the catalyst. When n(Co):n(Ti) = 0.05, the catalyst has the best catalytic performance with the NO conversion reaches 100% at 100 degrees C. CONCLUSION Temperature-programmed reduction (H-2-TPR) and temperature-programmed desorption (NH3-TPD) results showed that Ti-C,N can improve the redox ability but reduces the surface acidity. Co-doping has no effect on surface acidity, but the redox ability is further improved. A suitable amount of Co-doping is beneficial to the optimal catalytic activity of Mn-Ce-Co-0.05/Ti-C,N catalyst. This suggests a balance between redox properties and surface acidity. Especially for the strong redox ability, it can promote the oxidation of NO to NO2, and promote low-temperature NH3-SCR through the 'fast SCR' pathway. X-ray photoelectron spectroscopy results of the highest chemisorbed oxygen (O-alpha) concentration and relative atomic ratio (Mn4+/Mnn+, Ce3+/Cen+ and Co3+/Con+) confirmed the above conclusion. Both the Langmuir-Hinshelwood (L-H) and Eley-Rideal (E-R) mechanisms occurred in the NH3-SCR reaction over the Mn-Ce-Co-0.05/Ti-C,N catalyst. (c) 2021 Society of Chemical Industry

Performance of Low-temperature SCR of NO with NH3 over MnOx/Ti-based catalysts

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Low-temperature selective catalytic reduction of NO with NH3 over Mn–Ce–Ox/TiO2: a comparison between catalyst preparation methods

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

Low-temperature selective catalytic reduction of NO with NH3 over MnOx-CeO2/ZrO2-TiO2 monolith catalyst

Low-Temperature Selective Catalytic Reduction of NO with NH3 Over Mn–Ti Oxide Catalyst: Effect of the Synthesis Conditions

Catalytic performance of CeO2-NPs and α-MnO2 mixed oxides catalysts for low-temperature NH3-SCR of NO

Ni-Mn Bi-Metal Oxide Catalysts for the Low Temperature SCR Removal of NO with NH3

Mechanism and Kinetics Study on Low-Temperature NH3-SCR over Manganese–Cerium Composite Oxide Catalysts

Mechanistic and Performance Insights into Low-Temperature NH3-SCR Based on Ce-modified Mn-Ti Catalysts

Catalytic performance of MnO_x/WO_3/TiO_2 catalyst for low-temperature selective catalytic reduction of NO_x by NH_3

Effect of ceria doping on catalytic activity and SO 2 resistance of 1 MnO x / TiO 2 catalysts for selective catalytic reduction of NO with 2 NH 3 at low temperature 3

Influence of Preparation Methods on the Physicochemical Properties and Catalytic Performance of MnOx-CeO2 Catalysts for NH3-SCR at Low Temperature

Selective Catalytic Reduction of NOx with NH3 over Mn-Ce Mixed Oxide Catalyst at Low Temperatures

Performance of Mn-Ce/AC Catalyst for Low Temperature Selective Catalytic Reduction of NO with NH3

Low-temperature scr of no with nh3 on Mn-based catalysts modified with cerium

Effect of Preferential Exposure of Anatase TiO2 {0 0 1} Facets on the Performance of Mn-Ce/TiO2 Catalysts for Low-Temperature Selective Catalytic Reduction of NOx with NH3

Low-Temperature Selective Catalytic Reduction of NO with NH_3 over MnO_x-CeO_2/ZrO_2-TiO_2 Monolith Catalyst

Low-temperature Selective Catalytic Reduction of NO with NH3 over Monolith Catalyst of MnOx/CeO2–ZrO2–Al2O3

Low Temperature Selective Catalytic Reduction of NO over Manganese Supported on TiO2 Nanotubes

Low-temperature selective catalytic reduction of NO on MnOx/TiO2 prepared by different methods