Abstract:Widely present in the primary circuit of Nuclear Power Plants (NPP), Dissimilar Metal Welds (DMW) are inspected using Ultrasonic nondestructive Testing (UT) techniques to ensure the integrity of the structure and detect defects such as Stress Corrosion Cracking (SCC).In a previous collaborative research, CRIEPI and CEA have worked on the understanding of the propagation of ultrasonic waves in complex materials. Indeed, the ultrasonic propagation can be disturbed due to the anisotropic and inhomogeneous properties of the medium and the interpretation of inspection results can then be difficult. An analytical model, based on a dynamic ray theory, developed by CEA-LIST and implemented in the CIVA software had been used to predict the ultrasonic propagation in a DMW. The model evaluates the ray trajectories, the travel-time and the computation of the amplitude along the ray tube in a medium described thanks to a continuously varying description of its physical properties. In this study, the weld had been described by an analytical law of the crystallographic orientation. The simulated results of the detection of calibrated notches located in the buttering and the weld had been compared with experimental data and had shown a good agreement.The new collaborative program presented in this paper aims at detecting a real SCC defect located close to the root of the DMW. Thus, simulations have been performed for a DMW described with an analytical law and a smooth cartography of the crystallographic orientation. Furthermore, advanced ultrasonic testing methods have been used to inspect the specimen and detect the real SCC defect. Experimental and simulated results of the mock-up inspection have been compared.

Research on Nondestructive Examination of Bracket Welds of ITER In-Vessel Coils (IVC)

Failure analysis of Be/Cu joint in ITER first wall mock-ups

Developments of NDE Method of Jacket Welds for ITER In-Vessel Coil Joints

Nondestructive Evaluation of Eccentricity of ITER In-Vessel Coils Based on Eddy Current Testing

Developments of Nondestructive Test Method of Jacket Section for ITER Poloidal Field Coils

Thermal fatigue failure behavior on Be/Cu joint of ITER first wall after enhanced heat flux test

Non-destructive Examination on PF Butt Welds of ITER Superconducting Conductor

Immersed Ultrasonic Testing Methods for Conduit Tubes of ITER Superconducting Cables

Research on Nondestructive Examination of Jacket Section for CFETR TF Coil

Design Evolution and Integration of the ITER In-Vessel Components

Eddy current test research for eccentricity of international thermonuclear experimental reactor (ITER) in-vessel coils (IVCs) conductor

Nondestructive Evaluation of Eccentricity of Iter In-Vessel Coil Conductors Based on Pulsed Ect Method

Nondestructive Testing of East W/Cu Divertor Components

Eddy Current Testing of Eccentricity in Tokamak In-Vessel Coil Conductors Based on Flexible Probe

Research on Nondestructive Examination of Jacket Sections for CFETR Central Solenoid Model Coil

Fatigue Behavior Testing and Evaluation of ITER In-vessel Mock-Up Coil under Combined Thermal and Electromagnetic Loads

Proposal And Demonstration Of Strategies For Ndt Of Conduit Tube Of Cable In Conduit Conductors Used In Iter Pf Coils

Application of Phased Array Ultrasonic Test for Insulation System of CSMC

Final Design of ITER In-Vessel Coils and Manufacturing of In-Vessel Coil Conductor

Application of advanced ultrasonic testing methods to Dissimilar Metal Welds -- Comparison of simulated and experimental results

Application of E-Beam Welding in W/Cu Divertor Project for EAST