Abstract:Plasma facing components (PFCs) for the fusion device are employed to sustain the heat flux (10–20 MW/m2) and plasma particle flux in steady-state and transient conditions. Therefore, the performance of the PFCs is essential to maintain safe operation of the reactor. Before installation of the PFCs, the defects must be detected. Infrared non-destructive examination method is a novel non-destructive detection, having the advantages of non-contact, large detection area, fast detection, visual examination result. The active infrared non-destructive examination technology has been developed based on the structural feature of the PFCs and the active infrared thermograph facility is established. Experimental study is conducted with W/Cu PFCs samples with different sizes of artificial defects and with no defects, in which the infrared thermograph images are obtained. The detecting ability of the infrared non-destructive examination is evaluated by analyzing the temperature distribution of the samples. Based on the study of infrared thermograph processing methods, surface temperature error of the samples caused by uneven emissivity can be eliminated by maximum temperature deviation reconstruction method. Furthermore, fast discrete Fourier transform method can help increase the signal-to-noise ratio and realize defects distinguishment. As the supplementary of the experiments, numerical simulation is used to investigate the key influences of the active infrared non-destructive examination method with the finite element model for samples with different defect locations, defects sizes, mass flow rate of the coolant and the temperature of the coolant.

Non-destructive Examination on PF Butt Welds of ITER Superconducting Conductor

Developments of Nondestructive Test Method of Jacket Section for ITER Poloidal Field Coils

Research on Nondestructive Examination of Jacket Section for CFETR TF Coil

Failure analysis of Be/Cu joint in ITER first wall mock-ups

Research on Nondestructive Examination of Bracket Welds of ITER In-Vessel Coils (IVC)

Thermal fatigue failure behavior on Be/Cu joint of ITER first wall after enhanced heat flux test

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Manufacturing and testing of ITER FW CuCrZr/316L(N)-IG explosive Bi-metallic plates

Study on Industrial Computed Tomography Detection and Identification of Inclusion Defects in Thick-Wall Polyethylene Pipe Butt Fusion Joint Within Nuclear Power Plant

Developments of NDE Method of Jacket Welds for ITER In-Vessel Coil Joints

Immersed Ultrasonic Testing Methods for Conduit Tubes of ITER Superconducting Cables

Fatigue tests on the ITER PF jacket

Nondestructive Testing of East W/Cu Divertor Components

Research on depth measurement of surface defect on the jacket of ITER TF conductor

Proposal And Demonstration Of Strategies For Ndt Of Conduit Tube Of Cable In Conduit Conductors Used In Iter Pf Coils

Research on Nondestructive Examination of Jacket Sections for CFETR Central Solenoid Model Coil

Mechanical test on the ITER TF jacket

NDT Status of PF1 Coil Welds

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

W/Cu PFCs Defects Detection with Infrared Non-destructive Examination Method for EAST

Comparative study of ITER conform tungsten grades exposed to high heat flux and neutron irradiation damage