Abstract:The Central Solenoid Model Coil (CSMC) project of China Fusion Engineering Test Reactor (CFETR) was developed from 2014 at the Institute of Plasma and Physics Chinese Academy of Sciences (ASIPP) to verify the larger-scale superconducting magnet technology. The short twist pitch (STP) option was chosen for Nb3Sn Cable-In-Conduit Conductors (CICC) due to the stronger rigidity which can withstand the higher electromagnetic (EM) cycles effectively. Performance measurement of conductor short samples in SULTAN facility is the most important assessment method. This paper introduces the Nb3Sn strand parameters and CICC design firstly; then the preparation and measurement procedure of conductor short samples for current sharing temperature (T-cs) are described; subsequently, the T-cs vs. cycles, effective strain (epsilon(eff)) with B x I and transition broadness characteristics compared with strands are assessed qualitatively by power law model. The assessment result shows that the DC performance vs. cycles of the STP design for Nb3Sn CICC is very stable and no degradation. The notable result gives the confidence that life period in the CSMC can be achieved reliably although the number of the EM cycles has been limited to below 10 000 in the measurement. The successful DC performance testing of Nb3Sn CICC will be an important milestone for CSMC project. Lastly, the performance assessment in coil is performed at the typical test waveform. The minimum temperature margin (T-mag) of 0.14 K and electric field of 5 uV/m are achieved respectively. Some slow EM cycles is required to decrease the coupling loss deposition before coil testing.

Research on Nondestructive Examination of Jacket Sections for CFETR Central Solenoid Model Coil

Research on Nondestructive Examination of Jacket Section for CFETR TF Coil

Developments of Nondestructive Test Method of Jacket Section for ITER Poloidal Field Coils

Development and Test Results of a Full-Size Joint Sample for the CFETR Central Solenoid Model Coil

The Mechanical Performance Analyses of CFETR CSMC Preload Components Under Testing Current

Mechanical performance evaluation of the CFETR central solenoid model coil design

Development of the Helium Inlet and Outlet for the CFETR Central Solenoid Model Coil

Winding R&D for CFETR Central Solenoid Model Coil

A new enclosed method for transverse mechanical testing on CICC conductors

Manufacture and Test of a Prototype Nb3Sn-NbTi Joint Sample for the CFETR Central Solenoid Model Coil

Stability Analysis on Nb3Sn Sample Conductor of CFETR Central Solenoid Model Coil

DC Performance Measurement and Assessment of Nb 3 Sn Cable-In-Conduit Conductor for CFETR CS Model Coil

Pressure Drop Study of Protective Gas for Heat Treatment in CFETR Central Solenoid Model Coil

Mechanical and Electrical Properties of a CFETR CSMC Conductor under Transverse Mechanical Loadings

Application of Phased Array Ultrasonic Test for Insulation System of CSMC

Investigation of the Mechanical Properties of N50H Jacket for CFETR High-Temperature Superconducting Application

Status of Winding and Forming Technology Development for CFETR CSMC

Winding Design for CFETR Central Solenoid Model Coil

Manufacturing of Nb3Sn Sample Conductor for CFETR Central Solenoid Model Coil

Manufacturing Status of CFETR Central Solenoid Model Coil

Quantitative Nondestructive Estimation of Deep Defects in Conductive Structures