Abstract:Within the framework of magnetic confinement fusion, several projects worldwide are demonstrating the possibility of integrating high-temperature superconductors (HTS) in the coil systems. HTS-based technologies are highly attractive for practical applications because they can extend the operating margins of fusion coils in terms of higher temperatures, transport currents and magnetic fields. Based on the results achieved with the twisted-stacked tape cable, we have designed a novel low-loss HTS sector cable-in-conduit conductor, with a target of 60 kA at 4.5 K, 18 T, which is presently of interest for the DEMO Central Solenoid coil. In HTS cables, the AC losses can represent a significant limiting factor, therefore they must be taken into consideration both in the design phase and in the assessment of the overall magnet thermal budget. In this work, to assess the loss behavior and to optimize the cable design, we have explored different aspect ratios and arrangements of the stacked tapes within the cable layout. The magnetization losses are calculated with a 2D finite-element model based on the T-A formulation and analytical approximations based on the Brandt-Halse critical state model. Specifically, we have developed an analytical formulation that allows for the calculation of the instantaneous power losses in HTS stacked cables with a limited number of tapes per stack, achieving sufficient accuracy at high fields. The analytical model enables a sufficiently accurate assessment of the heat deposited on the conductor during those particular instants of a plasma scenario where the variation of the field is very high, such as during the critical initial discharge period of the plasma initiation.

Cable Modeling and DC Resistance Analysis of Terminations for 16 T Superconductor Test Facility

Conceptual Design Study of a Large Bore Superconducting Test Facility Magnet, SUCCEX

Construction Strategy for the Future K-DEMO Superconductor Test Facility

Development of a Conduction-Cooled HTS SMES

Conceptual Design Study of a Test Facility Magnet for Fusion Conductor Samples

Design Updates and Thermo-Hydraulic Analysis of K-DEMO CS Magnets

Design Updates and Analysis of the Korean Fusion Demonstration Reactor Superconducting Toroidal Field Magnet System

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Current Sharing in Superconducting REBCO Cables-FEM Modeling

Development of Electromagnetic Forming Nbti Superconducting Joint

A Combined Testing and Modelling Methodology for the Mechanics of High-Field Superconducting Magnets

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

DEMO200 – Concept and Design of a Superconducting 200 kA DC Busbar Demonstrator for Application in an Aluminum Smelter

Experimental and Numerical Study on the Magnetization Process of Roebel Cable Segments

AC losses in HTS sector shaped high-current conductors for fusion coils

Design and analysis of a HTS internally cooled cable for the Muon Collider target and capture solenoid magnets

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Design and Performance Tests of a Fault Current-Limiting-Type Tri-Axial HTS Cable Prototype

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Structural Design of DC Magnet for Super-X Test Facility