Abstract:Traveling wave fault location methods have gained considerable growth over the years, with the anticipation that power systems will be accurate and reliable everywhere. But the performance of classical traveling wave methods has focused only on traditional current transformer measurement in the literature till date. Therefore, in this paper, an innovative non-contact measurement of traveling wave formulation is proposed to achieve accurate fault location and time of arrival detection on a two-terminal overhead transmission line, since power cable naturally generates magnetic and electrical fields in the surrounding atmosphere. The proposed method solitary depends on the first two and successive time differences between the incident and reflective wave from the fault point of the transmission line. Thus, the proposed scheme does not depend on current transformer measurement that stimulates the accuracy and reliability of the conventional traveling wave fault location method. To ensure an accurate time of arrival waves detection, we exploit the magnetic field sensor array on each tower to measure the quality of current traveling waves generated on the transmission line and locate the transient disturbances as a result of a short circuit. By analyzing the line energization, a comprehensive fault analysis on a 500-kV line was simulated with PSCAD/MATLAB toolbox compared to the two-terminal classical method. The sensitivity analysis demonstrated that the proposed method is much accurate and reliable to be deployed and cost-effective, making it highly useful and efficient in comparison to the classical two terminals traveling wave method with an average error of 0.014%. The effectiveness of the proposed method was verified by laboratory experimental setup.

Inversion Method to Reconstruct Fault Transient Traveling Wave on Overhead Transmission Lines

Reproduction Methodology for Single Phase-to-Ground Faults in Overhead Transmission Lines

Methodology for Obtaining Key Transient Information of Unsymmetrical Earth Fault in Overhead Transmission Line

Study On New Method For Distributed Fault Location Of Overhead Transmission Line

Novel travelling wave fault location approach for overhead transmission lines

Fault Location in Overhead Transmission Line: A Novel Non-Contact Measurement Approach for Traveling Wave-Based Scheme

Method of fault location based on the distributed traveling-wave detection device on overhead transmission line

Transmission Line Fault Location Based on Improved Algorithm of Electromagnetic Time Reversal

NILT-Based Transient Traveling Wave Calculation Method for Lightning Stroke on Coupled Transmission Lines in DC Systems

Limiting the Steepness of VFTO Invaded Wave to the EHV Power Transformers Using Overhead Lines

Study on Fault Location Technology of the OPGW Transmission Line

Modified VMD Algorithm-Based Fault Location Method for Overhead-Cable Hybrid Transmission Line in MTDC System

Accurate Time-Domain Fault Location Method on Practically Transposed Transmission Lines

Fault Location Method for Transmission Line Based on Distributed Traveling Wave Detection

Fault Accurate Location Method in UHV GIL Based on Transient Voltage Travelling Wave

A novel traveling wave fault location method for transmission network based on time linear dependence

Fault Location Method for High‐voltage Direct Current Transmission Line Using Incident Current Travelling Waves

Design of fault location algorithm based on online distributed travelling wave for HV power cable

Frequency Domain Algorithm in the Whole Process Simulation from VFTO to Its Conducted Disturbance Via Voltage Transformer in GIS Substations

Transient Overvoltage Response Performance of Transformer Windings with Short-Circuit Fault

Fault location method based on edge detection for low SNR traveling waves