Abstract:Traveling wave fault location methods have gained considerable growth over the years, with the anticipation that power systems will be accurate and reliable everywhere. But the performance of classical traveling wave methods has focused only on traditional current transformer measurement in the literature till date. Therefore, in this paper, an innovative non-contact measurement of traveling wave formulation is proposed to achieve accurate fault location and time of arrival detection on a two-terminal overhead transmission line, since power cable naturally generates magnetic and electrical fields in the surrounding atmosphere. The proposed method solitary depends on the first two and successive time differences between the incident and reflective wave from the fault point of the transmission line. Thus, the proposed scheme does not depend on current transformer measurement that stimulates the accuracy and reliability of the conventional traveling wave fault location method. To ensure an accurate time of arrival waves detection, we exploit the magnetic field sensor array on each tower to measure the quality of current traveling waves generated on the transmission line and locate the transient disturbances as a result of a short circuit. By analyzing the line energization, a comprehensive fault analysis on a 500-kV line was simulated with PSCAD/MATLAB toolbox compared to the two-terminal classical method. The sensitivity analysis demonstrated that the proposed method is much accurate and reliable to be deployed and cost-effective, making it highly useful and efficient in comparison to the classical two terminals traveling wave method with an average error of 0.014%. The effectiveness of the proposed method was verified by laboratory experimental setup.

Fault Model and Travelling Wave Matching Based Single Terminal Fault Location Algorithm for T-Connection Transmission Line: A Yunnan Power Grid Study

Distributed Traveling-Wave-Based Fault-Location Algorithm Embedded in Multiterminal Transmission Lines

Sequential Data-Based Fault Location for Single-Line-to-Ground Fault in a T-Connection Power Line

Fault Location Algorithm for HV Transmission Lines Immune to Saturation of Current Transformers

A Distributed Fault Location Method For T-Connection Transmission Line

A fault location scheme based on composite traveling wave with transients in adjacent fault-free lines

New Fault Location Method for HV T-connection. Transmission Lines

Real-time velocity based fault location method of travelling wave for multi-terminal transmission lines

A novel traveling wave fault location method for transmission network based on time linear dependence

A Novel Current Travelling Wave Based Single-Ended Fault Location Method for Locating Single-Phase-to-ground Fault of Transmission Line

Fault Location Method in Power Network by Applying Accurate Information of Arrival Time Differences of Modal Traveling Waves

Reflected Traveling Wave Based Single-Ended Fault Location in Distribution Networks

Fault Location in Overhead Transmission Line: A Novel Non-Contact Measurement Approach for Traveling Wave-Based Scheme

Fault Location for Three-Terminal Transmission Lines Using Fault Voltage Sequence Components

A non-contact current traveling wave fault location method for multi-terminal overhead power lines based on adaptive mathematical morphology

Method and Simulation Analysis of Comprehensively Distributed Fault Location of Transmission Line

Transmission Line Fault Location Based on Improved Algorithm of Electromagnetic Time Reversal

An Accurate Fault Location Algorithm for Parallel Transmission Lines Using One-Terminal Data

Accurate single terminal fault location algorithm for single-line-to-ground fault in transmission lines with wind farm connection

Accurate fault location algorithm for transmission lines based on R-L model parameter identification

Single-ended traveling wave based fault location for single-phase-to-ground in power distribution lines