Abstract:Traveling wave fault location methods have gained considerable growth over the years, with the anticipation that power systems will be accurate and reliable everywhere. But the performance of classical traveling wave methods has focused only on traditional current transformer measurement in the literature till date. Therefore, in this paper, an innovative non-contact measurement of traveling wave formulation is proposed to achieve accurate fault location and time of arrival detection on a two-terminal overhead transmission line, since power cable naturally generates magnetic and electrical fields in the surrounding atmosphere. The proposed method solitary depends on the first two and successive time differences between the incident and reflective wave from the fault point of the transmission line. Thus, the proposed scheme does not depend on current transformer measurement that stimulates the accuracy and reliability of the conventional traveling wave fault location method. To ensure an accurate time of arrival waves detection, we exploit the magnetic field sensor array on each tower to measure the quality of current traveling waves generated on the transmission line and locate the transient disturbances as a result of a short circuit. By analyzing the line energization, a comprehensive fault analysis on a 500-kV line was simulated with PSCAD/MATLAB toolbox compared to the two-terminal classical method. The sensitivity analysis demonstrated that the proposed method is much accurate and reliable to be deployed and cost-effective, making it highly useful and efficient in comparison to the classical two terminals traveling wave method with an average error of 0.014%. The effectiveness of the proposed method was verified by laboratory experimental setup.

Modified VMD Algorithm-Based Fault Location Method for Overhead-Cable Hybrid Transmission Line in MTDC System

Travelling Waves Based Fault Location Method for Overhead-Cable Hybrid Multi-Terminal Transmission Line

Travelling wave fault location for LCC–MMC–MTDC transmission lines based on frequency-dependent characteristic

Travelling Wave Fault Location Approach for MMC-HVDC Transmission Line Based on Frequency Modification Algorithm

Travelling wave fault location algorithm for LCC-MMC-MTDC hybrid transmission system based on Hilbert-Huang transform

Fault Location of Hybrid Three-Terminal HVDC Transmission Line Based on Improved LMD

Fault Location Algorithm for HV Transmission Lines Immune to Saturation of Current Transformers

Design of fault location algorithm based on online distributed travelling wave for HV power cable

Travelling wave fault location principle for hybrid multi-terminal LCC-MMC-HVDC transmission lines based on C-EVT

Novel Fault Location in MTDC Grids With Non-Homogeneous Transmission Lines Utilizing Distributed Current Sensing Technology

A Traveling Wave-Based Fault Location Method Employing VMD-TEO for Distribution Network

EMTR-based Fault Location for DC Line in VSC-MTDC System Using High-Frequency Currents

Novel travelling wave fault location principle for VSC-HVDC transmission line

Fault location of cable hybrid transmission lines based on energy attenuation characteristics of traveling waves

Single-ended DC Fault Location Method For MMC-Based HVDC Power System Using Adaptive Multi-step Levenberg-Marquardt Algorithm

Traveling-wave-based Fault Location Algorithm for Star-Connected Hybrid Multi-Terminal HVDC System

A Novel Fault-Location Method for VSC-MTDC Transmission Lines Based on EMTR

A Frequency-Domain Fault Location Method for Underground Cables in MMC-HVDC Systems

A Novel Fault Location Method for HVDC Transmission Line Based on the Broadband Travelling Wave Information

Fault Location in Overhead Transmission Line: A Novel Non-Contact Measurement Approach for Traveling Wave-Based Scheme

Fault Location Scheme for Multi-Terminal Transmission Line Based on Frequency-Dependent Traveling Wave Velocity and Distance Matrix