Abstract:In this study, we investigated the relationship between the decarburization effect of the solid-state decarburization method for preparing silicon steel and the atomic diffusion behavior in the matrix, focusing on 1 mm thick Fe-0.18 wt% C-Si (1.5, 3.5 wt%) alloy strips as the research object. Solid-state decarburization experiments were carried out in an Ar-H2O-H2 atmosphere, and the self-diffusion behavior of C and Si in Fe-C-Si alloy system was simulated by molecular dynamics. The results show that the molecular dynamics simulation results are consistent with the decarburization experimental results. When the temperature is lower than 800 °C, the atoms maintain a compact bcc structure, so the migration rate of carbon is low. When the temperature rises, the atoms move violently, resulting in the destruction of the crystal structure. Because the atomic arrangement tends towards a disordered structure, the migration rate of C is high and the diffusion coefficient increases. The experimental results showed that the decarburization rate was accelerated. At the same temperature, the diffusion activation energy Q = 48.7 kJ·mol−1 of carbon in an Fe-3.5 wt% Si-C alloy matrix can be calculated. The diffusion activation energy of carbon Q = 47.3 kJ·mol−1 was calculated using a molecular dynamics simulation. When the content of Si is 3.5 wt% and 1.5 wt%, the diffusion series of Si can be expressed as D3.5Si, Si = 8.54 × 10−10 exp(−33,089.7/RT) m2/s and D1.5Si, Si = 2.06 × 10−9 exp(−46,641.5/RT) m2/s, respectively. When the Si content is 3.5 wt%, the diffusion coefficient of Si is larger. After diffusion to the near surface, it combines with the remaining O to form a continuous strip of SiO2. When the Si content is 1.5 wt%, the diffusion coefficient of Si is small. The remaining O diffuses in the matrix and will oxidize when encountering Si; it cannot aggregate in a highly-dispersed distribution. The lattice transition from face centered cubic lattice austenite to body centered cubic lattice ferrite occurred in the matrix of the thin strip. The diffusion coefficient of C in ferrite is much larger than that in austenite. Therefore, the decarburization rate suddenly increases before decarburization stagnation. With the increase in Si content, the diffusion activation energy of C decreases, which promotes the decarburization effect.

Characterization of Surface Oxidation and Numerical Simulation of Oxidation Kinetics for Fe-3%Si Steel During Decarburization

Oxidation Behavior of Quaternary Co-20Re-25Cr-3Si Alloy at Laboratory Air

High-temperature oxidation mechanism of Fe-3.0 wt%Si electrical steel with hybrid atmosphere

In-situ Measurement and Numerical Simulation of Nitriding Kinetics of Grain-Oriented Silicon Steel

Investigation of Selective Oxidation During Cooling of Hot-Rolled Iron-Manganese-silicon Alloys

Surface Decarburization Behaviour of A Novel Die Steel

High-Temperature Oxidation Behavior of Fe-1Cr-0.2Si Steel

The Effect of Surface Grinding and Si Addition on the Corrosion of Fe-12Cr ODS Steels in Supercritical CO2

Insights into the oxidation behavior of Ni-25Cr-10Fe-<i>x</i>Si (<i>x</i>=1, 2, 3, 4 wt%) alloys at 1000C in ambient air

Inhibition Behavior for the Oxidation of Si‐Doped Fe3O4: A Combined Ab Initio Molecular Dynamics and Experimental Study

Study on the high-temperature oxidation of AlCrFeCoNi-based high-entropy alloys with trace Si additions

Diffusion Behavior of Carbon and Silicon in the Process of Preparing Silicon Steel Using Solid-State Decarburization

Experimental and modelling research on the influence of different pre-decarburization microstructures of Fe-0.6C-1.8Si-0.8Mn spring steel

Effect of annealing process on surface selective oxidation behavior of C-Mn-Si high strength steels

Modeling of Oxidation Kinetics of Y-Doped Fe–Cr–Al Alloys

Characterization of surface layers of oxidation-reduction treated Si and Mn added advanced high strength steel

A Study of the Mechanism of Formation of Composite Oxide Scale on Heat-Resistant Steel 25Cr18Ni9Si2

Effect of Si Content and Temperature on Oxidation Resistance of Fe-Si Alloys

Isothermal Structure Transformation and Kinetics Behavior of Oxide Scale on Low Carbon Steel

Effect of surface finishing on the oxidation characteristics of a Fe-21Cr-32Ni alloy in supercritical carbon dioxide

The Oxidation of Fe/Ni Alloy Surface with Supercritical Water: A ReaxFF Molecular Dynamics Simulation