The Effect of Annealing Atmosphere on the Evolution Behavior of Inhibitors in Thin-Gauge Grain-Oriented Silicon Steel
G. Ma,Fuyao Yang,P. Hou,Wen-kang Zhang,W. Mao,Xin Chen,L. Meng,He Chengxu
DOI: https://doi.org/10.2320/MATERTRANS.M2017114
2017-09-29
Abstract:In this paper, 0.18 mm thin-gauge S-type steels with MnS and N-type steels with AlN as main inhibitors, respectively, were fabricated using three different final annealing systems. Moreover, the evolution behavior of the MnS and AlN [(Al, Si)N] particles and grain orientation were investigated. Number density and mean diameter of second-phase particles were statistically determined by field-emission scanning elec- tron microscopy. Results indicated that evolution of MnS and AlN would be suppressed with increased N 2 content during annealing. The onset ripening temperature of MnS was lower than that of AlN particle, which caused secondary recrystallization in the S-type samples at lower temperature compared with that of the N-type samples. Moreover, for the N-type steel fabricated by nitriding method, the effective inhibitor was (Al, Si)N formed by the decomposition of (Al, Mn, Si)N. The decomposition of (Al, Mn, Si)N particles and coarsening of (Al, Si)N in- hibitors were strongly inhibited and delayed with increased N 2 content in annealing atmosphere. In conclusion, N 2 / H 2 ratio of annealing atmosphere could be an effective control parameter to enhance the inhibition ability and delay secondary recrystallization onset in forming sharp Goss texture. [doi:10.2320 / matertrans.M2017114]
Materials Science,Engineering