Abstract:The evolution of phase composition and mechanical properties and the formation of oxide layers on Fe40–xNiCoCrAlx (x = 5 and 10 at.%) alloys in long-term oxidation at 900 and 1000°C were studied. In the initial cast state, depending on the aluminum content and valence electron concentration, the alloys contain only an fcc solid solution (VEC = 8 e/a) or a mixture of fcc and bcc phases (VEC = = 7.75 e/a). Thin continuous oxide scales containing Cr2O3 and NiCr2O4 spinel formed on the surface of both alloys oxidized at 900°C for 50 h. A further increase in the annealing time to 100 h leads to the formation of aluminum oxide Al2O3 in the scale on the Fe30Ni25Co15Cr20Al10 alloy, having high protective properties. An increase in the oxidation temperature to 1000°C results in partial failure of the protective layer on the alloy with 10 at.% Al. Long-term holding at 900°C (100 h) + 1000°C (50 h) does not change the phase composition of the Fe35Ni25Co15Cr20Al5 alloy matrix, being indicative of its high thermal stability. In the two-phase Fe30Ni25Co15Cr20Al10 alloy, the quantitative ratio of solid solutions sharply changes: the amount of the bcc phase increases from 4 to 54 wt.% and its B2-type ordering is observed. The mechanical characteristics of the starting alloys and those after long-term high-temperature annealing were determined by automated indentation. The hardness (HIT) and elastic modulus (E) of the cast Fe35Ni25Co15Cr20Al5 alloy are equal to 2 and 147 GPa, respectively, and decrease to 1.8 and 106 GPa after a series of long-term annealing operations. The Fe30Ni25Co15Cr20Al10 alloy shows the opposite dependence: HIT increases from 2.5 in the initial state to 3.1 GPa after annealing and E decreases from 152 to 134 GPa. This indicates that the Fe30Ni25Co15Cr20Al10 alloy is promising as a high-temperature oxidation-resistant and creep-resistant material.

Study on the high-temperature oxidation of AlCrFeCoNi-based high-entropy alloys with trace Si additions

The Effects of Alloying Elements Cr, Al, and Si on Oxidation Behaviors of Ni-Based Superalloys

Oxidation behavior of AlCoCrFeNiSi high-entropy alloys at 1100 °C

New insights in the oxidation behavior of (FeCoCrNi)94Al4Ti2Si high entropy alloys at 1100 °C

High Temperature Oxidation Behavior of Al0.5CrCoFeNi High Entropy Alloy

Enhancing oxidation resistance with Si in Fe36Ni36Al15Cr10Si2Mo1 multi-principal element alloy at 700 °C

Insights into the oxidation behavior of Ni-25Cr-10Fe-<i>x</i>Si (<i>x</i>=1, 2, 3, 4 wt%) alloys at 1000C in ambient air

Effect of aluminium and silicon on high temperature oxidation resistance of Fe-Cr-Ni heat resistant steel

Oxidation Behaviors of FeCrNiAl High Entropy Alloy and Its Microstructure Evolution

High temperature oxidation behavior and mechanism of Al0.3CuCrFeNi2 high-entropy alloy with a coherent γ/γ' microstructure

High-temperature oxidation behavior of laser additively manufactured AlCrCoNiSi-based high-entropy alloys at 1100 °C

Effect of Cr content on the high temperature oxidation behavior of FeCoNiMnCr x porous high-entropy alloys

Effect of Cr Content on the High Temperature Oxidation Behavior of FeCoNiMnCrx Porous High-Entropy Alloys

Oxidation behavior of Ti-Nb-Mo-Al-Six refractory high entropy alloy at 1000°C

High-temperature oxidation behavior of 9Cr-5Si-3Al ferritic heat-resistant steel

Effect of Si Content and Temperature on Oxidation Resistance of Fe-Si Alloys

Effect of Al and Ti on High-Temperature Oxidation Behavior of CoCrFeNi-Based High-Entropy Alloys

Effects of Al/Si on the oxidation behavior of a TiZrV0.5Nb0.5 refractory high entropy alloy at 1000 °C

Structural State of High-Entropy Fe40–xNiCoCrAlx Alloys in High-Temperature Oxidation

High Temperature Oxidation Resistance and Degradation Mechanism of Al-Si Coatings on Nickel-Based Superalloy at 1000.

Unraveling the Origin of the Excellent High-Temperature Oxidation Resistance of an AlCrFeNiTi Complex Concentrated Alloy