Abstract:Oxide dispersion strengthened FeCrAl alloys dispersed high-density nano-oxides in the matrix show outstanding corrosion resistance and mechanical properties. However, ODS FeCrAl alloys achieve the high strength generally at the expense of ductility in some way. Here, a method by introducing a bimodal grain structure was designed to overcome the strength-ductility tradeoff. In this work, ODS FeCrAl alloys were successfully fabricated through various mechanical alloying time, combined with spark plasma sintering under the vacuum of less than 4Pa. Microstructural characterization showed that the average grains size and nano-oxides size decrease gradually, and the density of nano-oxides increases, as the milling time increases. Mechanical properties revealed that both the strength and ductility were significantly synergistic enhanced with increasing milling time. The bimodal grain distribution characterized by electron backscatter diffraction (EBSD) (vacuum degree was less than 5E-5pa) was beneficial for the activation of the back stress strengthening and the annihilation of these microcracks, thus achieving the excellent ductility (27.65%). In addition, transmission electron microscope (TEM) characterization under the vacuum degree of less than 10-6pa illustrated that ultra-high-density nano-oxides (9.61E22/m3) was crucial for enhancing the strength of ODS FeCrAl alloys (993MPa). The strengthening mechanism superposition, based on the model of nano-oxides interrelated with the dislocation, illustrated an excellent agreement with experimental results from yield strength strengthening mechanisms. To our best knowledge, H40 (milled for 40h, and sintered at 1100C) alloy presents the outstanding strength with the exceptional ductility among all studied ODS FeCrAl alloys, which makes it the promising cladding materials for the accident tolerant fuel cladding.

High-Temperature Oxidation Properties and Microstructural Evolution of Nanostructure Fe-Cr-Al ODS Alloys

Microstructure Evolution and Oxidation Resistance Properties of Oxide Dispersion Strengthened FeCrAl Alloys at 1100 °C

Microstructure Evolution and Mechanical Properties of ODS FeCrAl Alloys Fabricated by an Internal Oxidation Process

Formation Mechanism of Nanoparticles in Fe–Cr–Al ODS Alloy Fabricated by Direct Oxidation Method

Microstructure and properties of oxide-reinforced FeCrAl matrix alloy manufactured by selective laser melting

Long-term Oxidation Behavior and Mechanism of DD6 Ni-based Single Crystal Superalloy at 1050 °C and 1100 °C in Air

Oxidation Behavior and Mechanism of a Ni-based Single Crystal Superalloy with Single Α-Al2o3 Film at 1000 °C

Exploring the Influence of Nanocrystalline Structure and Aluminum Content on High-Temperature Oxidation Behavior of Fe-Cr-Al Alloys

Effects of Al addition on high temperature oxidation behavior of 16Cr ODS steel

High temperature oxidation behavior of low density MA/ODS nickel-based superalloy

Characterization of Oxide Dispersoids and Mechanical Properties of 14Cr-Ods FeCrAl Alloys

Microstructure Evolution and Mechanical Properties of ODS FeCrAl Alloys Fabricated by Spark Plasma Sintering

Oxidation Behavior of Ni-Based Oxide Dispersion-Strengthened Alloy Fabricated by Direct Energy Deposition at 1100 °C

High Thermal Stability and Oxidation Behavior of FeCrNiAl-based Medium-Entropy Alloys Prepared by Powder Metallurgy

Oxidation Behaviors of FeCrNiAl High Entropy Alloy and Its Microstructure Evolution

High-temperature Oxidation Behavior of As-Cast Ni-Cr-Al-Fe Based Alloys

Enhanced strength-ductility combination by introducing bimodal grains structures in high-density oxide dispersion strengthened FeCrAl alloys fabricated by spark plasma sintering technology

The Influence of Aluminum Content on Oxidation Resistance of New-Generation ODS Alloy at 1200 °C

Interfacial microstructure and corrosion behavior of ODS FeCrAl alloy in oxygen-saturated lead-bismuth eutectic at 450 °C

Effect of Explosive Compaction on Microstructure of ODS FeCrAl Alloy Fabricated by Oxidation Method

Effect of Process Control Agent on Microstructures and High-Temperature Oxidation Behavior of a Nickel-Based ODS Alloy