Abstract:Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains, resulting in poor formability at room temperature. Therefore, the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets. The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al (wt.%) alloy during various annealed temperatures ranging from 300 °C to 450 °C, have been investigated using the quasi in-situ electron backscatter diffraction (EBSD) method. The as-rolled Mg-1Al alloy shows a dominant basal texture, which weakens and broadens in the rolling direction (RD) during the subsequent annealing, accompanied by the formation of 〈101¯0〉 texture component. Particularly, the 〈101¯0〉 texture component is more pronounced after annealing at high temperatures. The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands, which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45° from the normal direction (ND). Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process, resulting in a reduction in the texture intensity. Moreover, recrystallized grains belonging to the 〈101¯0〉 texture component grow preferentially compared to those with other orientations, which is attributed to low energy grain boundaries, especially grain boundaries with ∼30° misorientation angles. Furthermore, the high temperature annealing facilitates the rapid growth of grain boundaries having a 30° misorientation angle, leading to the occurrence of distinct 〈101¯0〉 texture after annealing at 450 °C for 1 h. The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.

Effect of S Phase Characteristics on the Formation of Recrystallization Textures of an Al-Cu-Mg Alloy

Texture Evolution of Hot Rolled Al–Cu–Mg–Zr Alloy During Annealing

Formation and development of Goss texture in Al–Cu–Mg alloy during solution treatment

Coincidence Site Lattice Boundary Mechanism for the Preferred Growth of Goss and Cube Grains During Annealing in an Al-Cu-Mg Alloy

Micro-mechanism of Texture Evolution During Isochronal Annealing of As-Annealed Hot Rolled Al-Cu-Mg Sheet

Texture Formation under Control of S Phase Characteristic and Tensile Property of Hot-Rolling 2A12 Aluminum Alloy Improved by Brass Texture

Evolution of Microstructure, Texture, and Hardness in an Al-Cu-Mg Alloy During Annealing

Influence of Particle Stimulated Nucleation on the Recrystallization Textures in Cold Deformed Al-alloys Part II—Modeling of Recrystallization Textures

Development of A Strong Goss Texture During Annealing of A Heavily Rolled Al-0.3% Cu Alloy

Development of Goss Texture in Al–0.3%Cu Annealed after Heavy Rolling

Microstructure and Texture Evolution in Cold-Rolled and Annealed Oxygen-Free Copper Sheets

The Preferential Growth and Related Textural Evolution During Static Recrystallization in a Cold-Rolled Mg–Zn–Gd Alloy

Evolution of Goss Texture in an Al–Cu–Mg Alloy During Cold Rolling

Insights of texture and microstructure evolution in the short time annealing of Al-Cu-Mg alloy at large temperature range

Evolution of the Brass Texture in an Al-Cu-Mg Alloy During Hot Rolling

Evolution of texture and microstructure of 2E12 aluminum alloy during cold rolling and annealing

Influence of Texture on the Mechanical Properties of a Mg-6Al-1Zn-0.9Sn Alloy Processed by ECAP

Unexpected texture transition induced by grain growth during static annealing of a dilute Mg-1Al alloy

Particle-stimulated nucleation and recrystallization texture initiated by coarsened Al2CuLi phase in Al–Cu–Li alloy

Unveiling Annealing Texture Formation and Static Recrystallization Kinetics of Hot-Rolled Mg-Al-Zn-Mn-Ca Alloy

The Role of Recrystallization and Grain Growth in Optimizing the Sheet Texture of Magnesium Alloys with Calcium Addition During Annealing