Abstract:With the increased use of 2D materials for instrument minimization, research on recrystallization texture of cold-deformed metal foils during annealing becomes attractive, as the recrystallization process is also subjected to external constraints (biaxial thermal strain and surface energy) in addition to the microstructural factors. In this work, the orientation evolution of cold-rolled Cu foils (10 mu m thick) during heating was thoroughly investigated macroscopically by neutron and synchrotron radiation diffraction and microscopically by SEM-EBSD, combined with crystallographic analysis. The results showed that the foils underwent a transition from the cold-rolling texture to a recrystallization texture dominated by two rotated orientations, i.e., RD-rotated Cube and phi(2)-rotated Copper. The transition was screened by both intrinsic microstructural and extrinsic geometrical factors. The orientations of the nuclei were mainly inherited from the deformation orientations. Those with low Taylor factors (Cube, Goss and Brass) demonstrated size preference. The post-nucleation growth was affected by the biaxial thermal elastic constraint and surface energy. Due to their opposite effects, the orientations having moderate biaxial moduli and surface energy density (S, Copper, Brass and recrystallization components) survived, resulting in a mixed texture at the completion of recrystallization. The coherent Sigma 3 boundaries between the new components stabilized their growth through consuming the other crystals separated by random high-angle boundaries. The present results provide quantitative information on recrystallization texture and contribute to deepening the understanding of the recrystallization behavior of cold-worked metals.

Development of A Strong Goss Texture During Annealing of A Heavily Rolled Al-0.3% Cu Alloy

Formation and development of Goss texture in Al–Cu–Mg alloy during solution treatment

Microstructure and Texture Evolution in Cold-Rolled and Annealed Oxygen-Free Copper Sheets

Understanding the Mechanisms of Texture Evolution of a Fe-24Cr-22Ni-7Mo Super Austenitic Stainless Steel During cold Rolling and Annealing

The role of Goss-oriented texture for brass-type texture in nickel-based metals during cold rolling

Microstructure and Texture Evolution of Cu-Ni-P Alloy after Cold Rolling and Annealing

Recrystallization Texture Evolution of Cold-Rolled Cu Foils Governed by Microstructural and Sample Geometrical Factors During Heating

Evolution of Microstructure and Crystallographic Texture in Severely Cold Rolled High Entropy Equiatomic CoCrFeMnNi Alloy During Annealing

Texture gradient in rough-rolled plate of aluminum alloy 3104 and its effect on annealing textures evolution after hot compression

Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5Mn alloy

Microstructure and Texture of Heavily Cold-Rolled and Annealed Fcc Equiatomic Medium to High Entropy Alloys

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Orientation relationship of texture development in hot-rolled W during annealing

Effect of Annealing Process on the Microstructure and Texture of Cold-Rolled High-Purity Al-0.5%Cu Plates

Intermediate Annealing of Warm-rolled Sheets and Its Influence on the Texture Evolution in the Rolled Columnar-grained Fe-Ga Alloys

Effects of Different Modes of Hot Cross-Rolling in 7010 Aluminum Alloy: Part I. Evolution of Microstructure and Texture

New insight of texture and microstructure evolution, and the connections between with tensile performance in as-annealed Al-Cu-Mg-Zr sheet

Microstructure and Texture Evolutions of Aa1050 Aluminum Alloy Cold Rolled to High Strains

Effect of cryogenic rolling on the microstructure and texture of CuCrZr alloy

Oriented Nucleation Causing Unusual Texture Transition During Static Recrystallization Annealing in Cold-Rolled Mg–Zn–Gd Alloys

Microstructure and Texture Evolution During Hot Rolling and Subsequent Annealing of Mg–1Gd Alloy