Abstract:With the increased use of 2D materials for instrument minimization, research on recrystallization texture of cold-deformed metal foils during annealing becomes attractive, as the recrystallization process is also subjected to external constraints (biaxial thermal strain and surface energy) in addition to the microstructural factors. In this work, the orientation evolution of cold-rolled Cu foils (10 mu m thick) during heating was thoroughly investigated macroscopically by neutron and synchrotron radiation diffraction and microscopically by SEM-EBSD, combined with crystallographic analysis. The results showed that the foils underwent a transition from the cold-rolling texture to a recrystallization texture dominated by two rotated orientations, i.e., RD-rotated Cube and phi(2)-rotated Copper. The transition was screened by both intrinsic microstructural and extrinsic geometrical factors. The orientations of the nuclei were mainly inherited from the deformation orientations. Those with low Taylor factors (Cube, Goss and Brass) demonstrated size preference. The post-nucleation growth was affected by the biaxial thermal elastic constraint and surface energy. Due to their opposite effects, the orientations having moderate biaxial moduli and surface energy density (S, Copper, Brass and recrystallization components) survived, resulting in a mixed texture at the completion of recrystallization. The coherent Sigma 3 boundaries between the new components stabilized their growth through consuming the other crystals separated by random high-angle boundaries. The present results provide quantitative information on recrystallization texture and contribute to deepening the understanding of the recrystallization behavior of cold-worked metals.

Coincidence Site Lattice Boundary Mechanism for the Preferred Growth of Goss and Cube Grains During Annealing in an Al-Cu-Mg Alloy

Development of cube texture in multistage annealing of high purity aluminum foils

Formation mechanism of Cube texture components ({001} ) associated with dynamic recrystallization during compression in the single BCC phase region of Ti-22Al-25Nb alloy

Formation Mechanism of Cube Texture Components ({001}<100>) Associated with Dynamic Recrystallization During Compression in the Single BCC Phase Region of Ti-22Al-25Nb Alloy

Influence Of Recrystallization Annealing On The Cube Texture In High-Purity Aluniinuni Foils

Oriented Nucleation Causing Unusual Texture Transition During Static Recrystallization Annealing in Cold-Rolled Mg–Zn–Gd Alloys

The Preferential Growth and Related Textural Evolution During Static Recrystallization in a Cold-Rolled Mg–Zn–Gd Alloy

Recrystallization behavior and texture evolution during annealing of cryogenic-rolled 3003 aluminum alloy

Quasi-in-situ Observing Unusual Grain Orientation Rotation During the Process of Static Recrystallization Grain Growth in Mg-Zn-Gd Alloy

Micro-process of Cube Texture Formation in High Purity Aluminum Foils by Cross Shear Rolling

Origin of Recrystallized Cubic Orientation Grains in Face-Centered Cubic Metals

Development of the Cube Texture at Low Annealing Temperatures in Highly Rolled Pure Nickel

Recrystallization Texture Evolution of Cold-Rolled Cu Foils Governed by Microstructural and Sample Geometrical Factors During Heating

Formation and development of Goss texture in Al–Cu–Mg alloy during solution treatment

Dislocation slips assisted grain rotation and specific texture evolution in a CoCrNi medium entropy alloy

Investigation of the Microstructure and Rolling Texture Evolution of Cu-45 At.% Ni Alloys During the Recovery Process by Quasi-In Situ Electron Backscatter Diffraction

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Quasi-in-situ Observations of Low-Angle Grain Boundaries, Twins and Texture Evolution During Continuous Annealing in a Cold-Rolled Mg-Zn-Gd Alloy

Microstructure and Texture Evolution of Cu-Ni-P Alloy after Cold Rolling and Annealing

STUDIES ON RECRYSTALLIZATION TEXTURES AND GRAIN BOUNDARY CHARACTER DISTRIBUTION IN LY12 ALUMINUM ALLOY

Unusual Twin Induced Recrystallization and Corresponding Texture Optimization in a Cold Rolled Mg-Gd-Zr Alloy During Annealing