Abstract:The iron element in electric arc furnace (EAF) slag is extremely difficult to recycle due to the low specific magnetic susceptibility of the RO phase (a solid solution of FeO, MgO, CaO, and MnO). Landfilling EAF slag is strictly forbidden for environmental consideration because of poisonous Cr6+ leaching. The original RO phase could be transformed to a spinel structure, whose specific magnetic susceptibility is much higher than that of other minerals, through hot modification, resulting in significantly increased iron recovery by magnetic separation. Precipitation of spinel crystals encloses chromium, such that iron and chromium could be recovered simultaneously. The chromium in obtained iron concentrates is considerably useful for stainless steel making rather than polluting the environment. As a result, recovering iron and chromium is truly beneficial for cleaner production. Hot modification of EAF slag should be conducted at 1500–1600 °C for at least 60 min to guarantee homogeneous liquid slag. The liquid slag was poured onto an iron mold to obtain modified slag (MS) through air quenching. MS was characterized by thermodynamic analysis, X-ray diffraction, and scanning electron microscopy combined with energy-dispersive spectroscopy to correlate the relationship between mineral structures and iron recovery. The iron recovery rate of MS first increased and then decreased with increasing modifier. It was less than 10% when the modifier addition amount was below 12 wt.%, but it increased rapidly as the modifier addition amount increased from 16 to 24 wt.%, mainly due to spinel formation. The highest iron recovery rate was 81.9% when the modifier amount reached 20 wt.%. Meanwhile, Cr6+ was enriched in the spinel phase but was not observed in other minerals. Industrial tests were performed on-site with the modifier ranging from 12 to 18 wt.% because additional heat was not provided during the tests. Results showed that MS with 18 wt.% modifier addition exhibited an iron recovery rate of 61.0%, much higher than that (34.6%) of the original slag.

Iron Recovery and Active Residue Production from Basic Oxygen Furnace (BOF) Slag for Supplementary Cementitious Materials

Preparation of High Performance Blended Cements and Reclamation of Iron Concentrate from Basic Oxygen Furnace Steel Slag

Synergetic modification of industrial basic oxygen furnace slag and copper slag for efficient iron recovery

Synergetic valorization of basic oxygen furnace slag and stone coal: Metal recovery and preparation of glass-ceramics

Combining Recovering Iron with Activating the Residual Slag Process for Electric Arc Furnace (EAF) Slag

A Novel Method of Extracting Iron from High-Iron Red Mud and Preparing Low-Carbon Cement Clinker from Tailings

Co-modification of BOF Slag and Copper Slag to Recover Valuable Metals by Carbothermal Reduction

Effects of Na2O additions to copper slag on iron recovery and the generation of ceramics from the non-magnetic residue

Stabilization of Free CaO in Molten BOF Slag by Addition of Silica at High Temperature

Optimization of Magnetic Separation Process for Iron Recovery from Steel Slag

Iron Recovery from Bauxite Tailings Red Mud by Thermal Reduction with Blast Furnace Sludge

Improving the early reactivity of activated basic oxygen furnace slag – The influence of particle fineness and grinding aids

The study on the reconstruction and evolution pathway of free lime by hot stage mixing molten ironmaking and steelmaking slags in a laboratory

Extraction of aluminum and iron from boiler slag by sulfuric acid

Novel method for improving iron recovery from electric arc furnace slag: on-site hot modification

Resource utilization of slag from desulphurization and slag skimming: A comprehensive recycling process of all components

Effect of Oily Sludge Treatment with Molten Blast Furnace Slag on the Mineral Phase Reconstruction of Water-Quenched Slag Properties

Method for extracting iron from copper smelting waste residue

Research on using limestone for slagging during BOF steelmaking process

An Efficient Reactor for High-Lead Slag Reduction Process: Oxygen-Rich Side Blow Furnace

Free CaO Stabilisation by Mixing of BF Slag and BOF Slag in Molten State