Abstract:With the continuous exploitation of primary high-quality mineral resources, these resources could be gradually exhausted, so it is of great significance to recover iron-rich basic oxygen furnace (BOF) slag as secondary mineral resources. Given the composition characteristics of BOF slag, a method of synergetic modification of copper slag as additive and BOF slag was proposed to separate iron minerals for recovery. In this study, FactSage thermodynamic simulation, chemical analysis, X-ray diffraction and scanning electron microscopy were used to analyze the phase transformation and structure evolution during the oxidative modification process, and the effects of oxidation temperature and addition amount of copper slag on the modification were studied. The results show that the addition of copper slag can effectively promote the transformation of iron oxides to MgFe2O4. When an appropriate amount of copper slag was added to make the basicity of the mixed slag be 2, the conversion rate of MgFe2O4, iron recovery rate and grade of magnetic slag were the best. In the oxidative modification process, increasing the oxidation temperature was beneficial to the formation and development of MgFe2O4. However, too high temperature could lead to the dissolution of Al3+ into MgFe2O4 and reduce its magnetism, which was not conducive to magnetic separation and recovery. When the mixed slag was modified at 1200 °C, the grade of magnetic slag by magnetic separation was 31.14 % and the recovery was 64.04 %, which had the potential of returning to sintering or ironmaking. The secondary slag obtained at the same time can also be used to produce high value-added materials. Therefore, the current technological route can transform the two kinds of industrial solid waste into usable resources at the same time, and realize

Method for extracting iron from copper smelting waste residue

Iron and copper recovery from copper slags through smelting with waste cathode carbon from aluminium electrolysis

A Novel Method of Extracting Iron from High-Iron Red Mud and Preparing Low-Carbon Cement Clinker from Tailings

An approach of cobalt recovery from waste copper converter slags using pig iron as capturing agent and simultaneous recovery of copper and tin

Stepwise Utilization Process to Recover Valuable Components from Copper Slag

An efficient approach to utilize copper smelting slag: Separating nonferrous metals and reducing iron oxide at high temperature

Synergetic modification of industrial basic oxygen furnace slag and copper slag for efficient iron recovery

Separation of silicon and iron in copper slag by carbothermic reduction-alkaline leaching process

Extraction of aluminum and iron from boiler slag by sulfuric acid

Effect of Iron Phase Evolution on Copper Separation from Slag Via Coal-Based Reduction

Eco-friendly iron extraction from fe-containing copper smelting slag via reduction roasting with coal and magnetic separation: Experimental and mechanism insights

Reduction of Copper Smelting Slag by Carbon for Smelting Cu-Fe Alloy

Removal of Arsenic During Iron Extraction from Waste Copper Slag

Recovery of copper from refining slags of copper fire anode furnace by waste acid leaching and CaO roasting process

Efficient Recycling of Valuable Metals from Waste Copper Slag by Using Secondary Aluminum Dross as a Novel Reductant

Energy conservation and emission reduction through utilization of latent heat of copper slag for iron and copper recovery

Study on Separation of Iron from Waste Slag of Pyrite Processing

A Thermodynamic and Experimental Assessment of the Recovery of Copper, Iron, Zinc, and Lead from Copper Slag

Efficient extraction and separation of zinc and iron from electric arc furnace dust by roasting with FeSO<sub>4</sub>?7H<sub>2</sub>O followed by water leaching

Recovery of Cu-Fe Alloy from Copper Smelting Slag

Innovative methodology for the utilization of low-grade pyrite cinder containing heavy metals via hydrothermal alkali melting followed by chlorination roasting