An approach of cobalt recovery from waste copper converter slags using pig iron as capturing agent and simultaneous recovery of copper and tin

Lei Li,Yang Xiao,Yun Lei,Jingzhuang Xu,Zhipeng Xu

DOI: https://doi.org/10.1016/j.wasman.2023.04.019

IF: 8.816

2023-04-19

Waste Management

Abstract:Massive amounts of waste copper converter slags have been produced from pyrometallurgical extraction of copper from copper concentrates, and the disposal of them in landfills creates serious environmental problems. However, this converter slag contains numerous valuable heavy metals, including copper, cobalt and tin etc. In this research, due to similar properties of iron and cobalt, pig iron with a low melting point was creatively used as capturing agent for cobalt recycling in a smelting reduction. The recovery of copper and tin was also studied. The phase transformation during reduction process was clarified by X-ray diffraction and Scanning electron microscope-energy dispersive spectrometer analyses. After the reduction performed at 1250 °C, the copper, cobalt and tin were recovered in a copper-cobalt-tin-iron alloy. The addition of pig iron improved cobalt yield, which was ascribed to the enrichment of cobalt in an iron–cobalt alloy phase. This decreased activity of the reduced cobalt and promoted reduction of cobalt oxide. As a result, the cobalt yield had a significant increase from 66.2% to 90.1% by adding 2% pig iron. Similarly, the copper also accelerated tin recovery through the formation of a copper–tin alloy. The copper and tin yields reached 94.4% and 95.0%, respectively. This work provided a high efficiency method to recover copper, cobalt and tin from waste copper converter slags.

environmental sciences,engineering, environmental