Abstract:The boron nitride reinforced fused silica (BN/SiO2) ceramics are excellent high-temperature wave-transparent candidates, but encumbered by the unsatisfactory reliability and economy until now. Herein, promising BN whisker reinforced SiO2 (BNW/SiO2) ceramics are fabricated via hot-pressing, aiming to provide fundamental insight into their microstructural evolution, mechanical and dielectric properties. The densification behaviour and microstructural evolution are characterized by step-testing the sintering temperature and the BNW content, determining that SiO2 matrix undergoes crystal nucleus breeding (≤1300 °C), followed by nucleation and growth (>1300 °C), and BNW presents a uniform and stable structure (≤1350 °C) and skin-core structure (1450 °C), respectively. The underlying strengthening and toughening mechanisms are elucidated through constructing a multilevel porosity dependence of mechanical behaviour associated with the BNW content. Compared with 5 wt. % BNW/SiO2 ceramic sintered at 1350 °C (S5-1350), the lightweight 20 wt. % BNW/SiO2 ceramic sintered at 1300 °C (S20-1300) exhibits 619.1% higher machinability parameter while maintaining the mechanical properties. Moreover, the lightweight S20-1300 possesses a low dielectric constant (ε) of 3.77, loss tangent (tan δ) of 1.25 × 10-3 and coefficient of thermal expansion (CTE) of 1.34 × 10-6 K-1. The insights obtained from this study would help to advance the application of BN/SiO2 ceramics in high-temperature radome.

Effect of the BN Content on the Thermal Shock Resistance and Properties of BN/SiO2 Composites Fabricated from Mechanically Alloyed SiBON Powders

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Fabrication and Properties of SiO2-BN-Si3N4 Composites

Effect of sintering temperature on microstructure and mechanical properties of boron nitride whisker reinforced fused silica composites

Fabrication and properties of porous boron nitride/silicon oxynitride ceramic composites via gas pressure sintering

Mechanical, dielectric and thermal properties of porous boron nitride/silicon oxynitride ceramic composites prepared by pressureless sintering

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Thermal Shock Behavior of Si3N4/BN Fibrous Monolithic Ceramics

Microstructure, mechanical properties and thermal shock behavior of h-BN-SiC ceramic composites prepared by spark plasma sintering

Preparation and Properties of BN-SiO<sub>2</sub> Composite Ceramics

Influence of sintering temperature on the crystallization and mechanical properties of BN‐MAS composites

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

The microstructural evolution, mechanical and dielectric properties of BNW/SiO2 ceramics

Silicon nitride/boron nitride ceramic composites fabricated by reactive pressureless sintering

Effects of h‐BN on the thermal shock and oxidation resistance of SiO2‐bonded SiC refractories

Ion-irradiation effect on swelling and microstructure of BN particle dispersed liquid phase sintering SiC

Influence of hBN content on mechanical and tribological properties of Si3N4/BN ceramic composites

Preparation of Si2N2O wave-transparent and thermal insulation materials with Na2CO3 and BN as aids by pressureless sintering

Characterization and Microstructural Evolution of Continuous BN Ceramic Fibers Containing Amorphous Silicon Nitride