Abstract:This experimental study delves into the intricate mechanics of stress concentration and fatigue behavior exhibited by 9% Ni steel welded joints under cryogenic conditions. The study specifically examines butt-welded, fillet longitudinal, and fillet transverse specimens, comparing their fatigue properties under room and cryogenic temperatures. Notably, determining hot-spot stress presents a challenge, as it cannot be directly obtained through traditional means. To overcome this limitation, a method for predicting hot-spot stress is introduced, which considers the effects of misalignments and weld bead characteristics. The study also highlights the impact of grip-clamping-induced specimen deformation and the reduced middle section on stress concentration resulting from misalignments. Furthermore, it proposes separate consideration of the effects of the weld bead on the axial nominal stress and on the bending stress of the specimen. The accuracy of strain gauge measurements in cryogenic environments is addressed by suggesting a method to correct the output of 2-wire strain gauges using a fixed ratio derived from 2-wire and 3-wire strain gauges. By comparing predicted hot-spot stress with actual measurements, the study validates the reliability of the proposed predictive method. These findings contribute to a deeper understanding of the behavior of 9% Ni steel welded joints under cryogenic conditions and provide valuable insights for design and engineering in similar applications.

Cryogenic Fracture Toughness of 9%ni Steel Flux Cored Arc Welds

Low-cycle Fatigue and Fracture Behaviour of 9%ni Steel Flux Cored Arc Welding Joint at Cryogenic Temperature

The Influence of Microstructure Evolution in Thick Plate 9%ni Steel Submerged Arc Welding Joint on Fracture Toughness Properties

The Cryogenic Low-Cycle Fatigue Performance of 9%ni Steel Joint Made by Flux Cored Arc Welding

Microstructure Characteristics and Properties of Fusion Boundary in 9%ni Steel Joint Filled with Ni-based Alloy

Cryogenic fracture toughness of high manganese steel joint and 7 %Ni steel joint welded with nickel-based filler metal

Effect of Gradient Microstructure and Strength Mismatch on Cryogenic Toughness of Fe-Ni Fusion Boundary

Experimental Investigation of Stress Concentration and Fatigue Behavior in 9% Ni Steel Welded Joints under Cryogenic Conditions

Factors Influencing Notch Toughness of Coarse-grained Heat Affected Zone for 9% Ni Steel

Investigation on the weakest zone in toughness of 9Cr/NiCrMoV dissimilar welded joint and its enhancement

Design of Novel Fe–Mn–Ni Cryogenic Steel: Microstructure-Property Relationship During Simulated Welding

Tensile Properties and Fracture Behavior of Friction Stir Welded Joints of Fe-32Mn-7Cr-1Mo-0.3N Steel at Cryogenic Temperature

Two Fatigue Fracture Modes at Different Temperatures of 10%cr Heat-Resistant Steel Weldment Filled with Ni-Based Alloy

Fatigue Crack Growth Mechanism of Ni-based Weld Metal in a 9% Ni Steel Joint

COMPARATIVE STUDIES ON MICROSTRUCTURE AND TOUGHNESS OF 9 % Ni STEEL JOINTS WELDED BY SMAW AND GTAW

Correlations of Ni Contents, Formation of Reversed Austenite and Toughness for Ni-Containing Cryogenic Steels

9 mass%Ni鋼の低温変形挙動

Evolution of microsegregation-induced precipitations and bending fracture mechanisms of 9% Ni steel weldments filled with nickel-based alloys

Microstructural and chemical dependences of fracture toughness in stainless steel welds at 4.2 K

Research on Weldability of 9ni Steel Used for LNG Cryogenic Storage Tank

An extraordinary improvement in cryogenic toughness of K-TIG welded 9Ni steel joint assisted by alternating axial magnetic field