Abstract:Purpose The purpose of this study is to propose a simplifying approach for modelling a reliability test. Modelling the reliability tests of printed circuit board (PCB)/microelectronic component assemblies requires the adoption of several simplifying assumptions. This study introduces and validates simplified assumptions for modeling a four-point bend test on a PCB/wafer-level chip scale packaging assembly. Design/methodology/approach In this study, simplifying assumptions were used. These involved substituting dynamic imposed displacement loading with an equivalent static loading, replacing the spherical shape of the interconnections with simplified shapes (cylindrical and cubic) and transitioning from a three-dimensional modelling approach to an equivalent two-dimensional model. The validity of these simplifications was confirmed through both quantitative and qualitative comparisons of the numerical results obtained. The maximum principal plastic strain in the solder balls and copper pads served as the criteria for comparison. Findings The simplified hypotheses were validated through quantitative and qualitative comparisons of the results from various models. Consequently, it was determined that the replacement of dynamic loading with equivalent static loading had no significant impact on the results. Similarly, substituting the spherical shape of interconnections with an equivalent shape and transitioning from a three-dimensional approach to a two-dimensional one did not substantially affect the precision of the obtained results. Originality/value This study serves as a valuable resource for researchers seeking to model accelerated reliability tests, particularly in the context of four-point bending tests. The results obtained in this study will assist other researchers in streamlining their numerical models, thereby reducing calculation costs through the utilization of the simplified hypotheses introduced and validated herein.

Experimental and Theoretical Analysis of Integrated Circuit (ic) Chips on Flexible Substrates Subjected to Bending

Dynamic Behaviors of Controllably Buckled Thin Films

Mechanics of Curvilinear Electronics

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Lateral Buckling of Interconnects in A Noncoplanar Mesh Design for Stretchable Electronics

Postbuckling Analysis and Its Application to Stretchable Electronics

Interfacial Failure in Flexible Electronic Devices

A Simply Analytic Study of Buckled Thin Films on Compliant Substrates

Buckling Behavior Of Metal Film/Substrate Structure Under Pure Bending

Instability and failure analysis of film-substrate structure under electrical loading

Conformal Theoretical Modeling of Arbitrary Shape Flexible Electronic Sensors Mounted Onto General Curved Surface Substrates

Prediction and Regulation of Delamination at Flexible Film/Finite-Thickness-Substrate Structure Interfaces

Stretchable and Foldable Silicon Integrated Circuits

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

Design of Strain-Limiting Substrate Materials for Stretchable and Flexible Electronics

Size-Dependent Analysis of Strain Energy Release Rate of Buckling Delamination Based on the Modified Couple Stress Theory

Transition among failure modes of the bending system with a stiff film on a soft substrate

Simplifying finite elements analysis of four-point bending tests for flip chip microcomponents

Interfacial Delamination of Inorganic Films on Viscoelastic Substrates

Mechanics of Noncoplanar Mesh Design for Stretchable Electronic Circuits

Study on the Crack Propagation of Stiff-Thin-Film-on-Soft-Substrate Structures under Biaxial Loading