Abstract:Carbon electrodes have gained widespread attention as a sustainable, stable, and low-cost alternative to metal electrodes in perovskite solar cells (PSCs). However, the power conversion efficiency (PCE) of carbon electrode-based PSCs (C-PSCs) without the hole-transport-layer (HTL) lags far behind their metal-electrode-based counterparts (M-PSCs), and the key factors causing this PCE downgrading have not been comprehensively elucidated. Herein, we study the photovoltaic performance of various HTL-free C-PSCs employing four typical absorbers, namely MAPbI 3 (MA = CH 3 NH 3 ), FAPbI 3 (FA = CH(NH 2 ) 2 ), one-step processed FA 0.85 MA 0.15 PbI 3 (FA/MA-OS), and two-step processed FA 1− x MA x PbI 3 (FA/MA-TS). Unexpectedly, we found that the PCE of C-PSCs follows the order MAPbI 3 > FAPbI 3 > FA/MA-TS > FA/MA-OS, quite different from that of devices with the Ag-electrode (FAPbI 3 > FA/MA-TS > FA/MA-OS > MAPbI 3 ). The in-depth studies reveal that the remarkable differences in surface roughness, surface potential (SP) distribution, and local built-in potential ( V bi ) of the four absorber films directly affect both the physical and electrical contacts between the perovskite and carbon electrode, which finally determine the efficiency of C-PSCs. Among them, the MAPbI 3 films possess the smallest roughness and minimum SP gaps between the grain boundaries (GBs) and the grain interiors (GIs), which enable compact contact at the perovskite/carbon interface and higher V bi within the C-PSCs for fast charge transfer, significantly suppressed nonradiative recombination, and thus the highest PCE (15.42%). Based on these findings, we provide some promising approaches for the development of high-efficiency C-PSCs, especially for the ones employing FA-based perovskite absorbers which have performed excellently in M-PSCs.

Achieving High Open‐Circuit Voltages Up to 1.57 V in Hole‐Transport‐Material‐Free MAPbBr3 Solar Cells with Carbon Electrodes

All-inorganic, Hole-Transporting-layer-free, Carbon-Based CsPbIBr2 Planar Solar Cells with ZnO As Electron-Transporting Materials

Stable Hole-Free, Carbon-Based CsPbI3 Perovskite Solar Cells Achieving 12.45 %-Efficiency at a Low Temperature with Mn Doping and Excess CsBr Simultaneously

Pushing the Envelope: Achieving an Open‐Circuit Voltage of 1.18 V for Unalloyed MAPbI3 Perovskite Solar Cells of a Planar Architecture

Efficient and Stable Large Bandgap MAPbBr<sub>3</sub> Perovskite Solar Cell Attaining an Open Circuit Voltage of 1.65 V

Precursor engineering for performance enhancement of hole-transport-layer-free carbon-based MAPbBr3 perovskite solar cells

Carbon Nanotubes As an Efficient Hole Collector for High Voltage Methylammonium Lead Bromide Perovskite Solar Cells.

Wide-bandgap MAPbBr 3 perovskite solar cells using bifunctional-molecule additives achieving a high open-circuit voltage of 1.63 V

An Amorphous Precursor Route To The Conformable Oriented Crystallization Of Ch3nh3pbbr3 In Mesoporous Scaffolds: Toward Efficient And Thermally Stable Carbon-Based Perovskite Solar Cells

Organic Bromide Salts Interface Modification for High-Efficiency Perovskite Solar Cells with Printed Carbon Electrode

Light Processing Enables Efficient Carbon-Based, All-Inorganic Planar CsPbIBr2 Solar Cells with High Photovoltages

Multifunctional Brominated Graphene Oxide Boosted Charge Extraction for High-Efficiency and Stable All-Inorganic CsPbBr3 Perovskite Solar Cells

Methylamine-Based Method to Deposit MAPbI3 Nanoscale-Thick Films for Efficient Perovskite Solar Cells with Carbon Electrodes

Ligand‐Induced In Situ Epitaxial Growth of PbI2 Nanosheets/MAPbI3 Heterojunction Realizes High‐Performance HTM‐Free Carbon‐Based MAPbI3 Solar Cells

Boron Doping of Multiwalled Carbon Nanotubes Significantly Enhances Hole Extraction in Carbon-Based Perovskite Solar Cells

Probing the key roles of the back interface in the performance of carbon-based hole-transport-layer free perovskite solar cells

High-performance Carbon Electrode-Based CsPbI2Br Inorganic Perovskite Solar Cell Based on Poly(3-Hexylthiophene)-carbon Nanotubes Composite Hole-Transporting Layer.

Study on the Performance of CuBr2 Doped Cs2AgBiBr6 Perovskite Solar Cells with Carbon Electrode and Without a Hole-Transporting Layer

Coordinating light management and advance metal nitride interlayer enables MAPbI3 solar cells with >21.8% efficiency

Engineering the Hole Extraction Interface Enables Single‐Crystal MAPbI 3 Perovskite Solar Cells with Efficiency Exceeding 22% and Superior Indoor Response

Band Alignment Engineering Towards High Efficiency Carbon-Based Inorganic Planar Cspbibr2 Perovskite Solar Cells