Abstract:Perovskite solar cells (PSCs) have shown high optical absorption and consequently provide high conversion efficiency with stable performance. In our work, CH 3 NH 3 PbI 3 (MAPbI 3 ) as an absorber layer is analyzed for different crystalline structures. Cubic, tetragonal, and orthorhombic phases of perovskite material are investigated to check the impact of the crystalline structure on the solar cell performance. Both density of states and band structure are studied using Quantum-ESPRESSO package depending on density functional theory. Then, all relevant parameters were employed in SCAPS software and comprehensive study was done for examining the effect of the crystalline structure of perovskite layer on the solar cell performance. In-depth, analyses were conducted to evaluate key parameters, including open circuit voltage (V oc ), short circuit current (I sc ), fill factor (FF), and power conversion efficiency (PCE) considering the variations of perovskite layer thickness and bulk defect densities. The obtained results indicate that cells with cubic MAPbI 3 , which shows a notably higher bandgap of 1.7 eV and an enhanced optical absorption coefficient, especially in the higher wavelength range (around 10 5 cm −1 ), show better performance for almost all three scenarios. Cubic MAPbI 3 cells achieve relatively higher peak efficiency of 26% when the absorber layer thickness is almost 900 nm. The investigation into absorber bulk defect densities reveals the critical role of defect levels in PSC performance. Adjusting defect levels from 10 14 cm −3 to 10 18 cm −3 results in deteriorating trends in V oc , J sc , FF, and PCE. J sc remains stable until a defect level of 10 17 cm −3 , highlighting a threshold where defects begin to impact charge carrier generation and separation. Doping effect has been studied, PCE remains stable until a critical doping level of 10 16 cm −3 after which it drops significantly which indicates that doping is cautioned against due to its adverse effects on material and carrier transport. This finding holds significant promise for experimental solar cell fabrication, as it suggests that cubic MAPbI 3 's superior bandgap and enhanced optical absorption could lead to more efficient and robust photovoltaic devices in real-world applications.

Coordinating light management and advance metal nitride interlayer enables MAPbI3 solar cells with >21.8% efficiency

Reduced Lattice Mismatch at the Interface of Perovskite and LaNiO3 Hole Transport Layers for Highly Efficient P–i–n Perovskite Solar Cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

High Performance Inverted RbCsFAPbI3 Perovskite Solar Cells Based on Interface Engineering and Defects Passivation.

Efficiency Improvement of MAPbI3 Perovskite Solar Cells Based on a CsPbBr3 Quantum Dot/Au Nanoparticle Composite Plasmonic Light-Harvesting Layer

Wide-bandgap MAPbBr 3 perovskite solar cells using bifunctional-molecule additives achieving a high open-circuit voltage of 1.63 V

2D PEA 2 PbI 4 –3D MAPbI 3 Composite Perovskite Interfacial Layer for Highly Efficient and Stable Mixed-Ion Perovskite Solar Cells

Air-processed MAPbI3 perovskite solar cells achieve 20.87% efficiency and excellent bending resistance enabled via polymer dual-passivation strategy

Ligand‐Induced In Situ Epitaxial Growth of PbI2 Nanosheets/MAPbI3 Heterojunction Realizes High‐Performance HTM‐Free Carbon‐Based MAPbI3 Solar Cells

Engineering the Hole Extraction Interface Enables Single‐Crystal MAPbI 3 Perovskite Solar Cells with Efficiency Exceeding 22% and Superior Indoor Response

Bilayer Broadband Antireflective Coating to Achieve Planar Heterojunction Perovskite Solar Cells with 23.9％Efficiency

Study on Performance Optimization of Perovskite Solar Cells Based on MAPbI3

Crystallization and Defect Chemistry Dual Engineering for MAPbI 3 Perovskite Solar Cells with Efficiency Approaching 22%

Bifunctional ionic liquid for enhancing efficiency and stability of carbon counter electrode-based MAPbI3 perovskites solar cells

Comprehensive performance analysis of perovskite solar cells based on different crystalline structures of MAPbI3

Synergetic interfacial passivation, band alignment, and long-term stability with halide-optimized CsPbBr x I 3− x nanocrystals for high-efficiency MAPbI 3 solar cells

Thermally Stable Mapbi(3) Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 Cm(2) Achieved by Additive Engineering

Optimizing the working mechanism of the CsPbBr3-based inorganic perovskite solar cells for enhanced efficiency

Interface engineering and defect passivation for enhanced hole extraction, ion migration, and optimal charge dynamics in both lead-based and lead-free perovskite solar cells

Simulation Study of Significant Optical Absorption Enhancement for “N-I-p” Structured Perovskite Solar Cells with Optimized Periodic Nano Texture

Power Conversion Efficiency Enhancement of Low-Bandgap Mixed Pb–Sn Perovskite Solar Cells by Improved Interfacial Charge Transfer