Abstract:In this study, the quality of large‐area perovskite film is improved by using ionic liquid additives via forming a new Pb‐N bonding between the ionic liquid and Pb2+. A champion power conversion efficiency of 24.4% for small‐area (0.148 cm2) devices and 20.4% for larger‐area modules (10.0 cm2) are achieved. The devices and modules exhibit excellent long‐term stability. Metal‐halide perovskite solar cells (PSCs) exhibit outstanding power conversion efficiencies (PCEs) when fabricated as mm‐sized devices, but creation of high‐performing large‐area modules that are stable on a sufficiently long timescale still presents a significant challenge. Herein, the quality of large‐area perovskite film is improved by using ionic liquid additives via forming a new Pb‐N bonding between the ionic liquid and Pb2+. This new bond can be modulated by a critical screening of the anion structure of the ionic liquid. The selected ionic liquid effectively reduces the defects of the perovskite films and markedly elongate their carrier lifetimes. As a result, a champion PCE of 24.4% for small‐area (0.148 cm2) devices and 20.4% for larger‐area (10.0 cm2) modules under AM 1.5G irradiation is achieved. More importantly, the modified devices retain 90% of their peak PCE after aging for 1900 h at 65 ± 5 °C (ISOS‐T‐1) and 80% after continuous light soaking for 750 h. The non‐encapsulated modules maintained 80% of their peak PCE after 1100 h of aging in the air with a relative humidity of 35 ± 5% and temperature of 25 ± 5 °C under dark (ISOS‐D‐1), showing great potential for future commercialization.

Thermally Stable Mapbi(3) Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 Cm(2) Achieved by Additive Engineering

Stabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking

Wide-bandgap MAPbBr 3 perovskite solar cells using bifunctional-molecule additives achieving a high open-circuit voltage of 1.63 V

Low-Temperature robust MAPbI 3 perovskite solar cells with power conversion efficiency exceeding 22.4%

Superior Textured Film and Process Tolerance Enabled by Intermediate-State Engineering for High-Efficiency Perovskite Solar Cells

CsPbBr3 quantum dots assisted crystallization of solution-processed perovskite films with preferential orientation for high performance perovskite solar cells

Air-processed MAPbI3 perovskite solar cells achieve 20.87% efficiency and excellent bending resistance enabled via polymer dual-passivation strategy

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Highly efficient (200) oriented MAPbI3 perovskite solar cells

Improvement of Cs-(FAPbI(3))(0.85)(MAPbBr(3))(0.15) Quality Via DMSO-Molecule-Control to Increase the Efficiency and Boost the Long-Term Stability of 1cm(2) Sized Planar Perovskite Solar Cells

A Helical Polycycle Molecular Semiconductor for Durable and Efficient Perovskite Solar Cells

Ionic Liquid Stabilized Perovskite Solar Modules with Power Conversion Efficiency Exceeding 20%

Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface

Coordinating light management and advance metal nitride interlayer enables MAPbI3 solar cells with >21.8% efficiency

Retarding solid-state reactions enable efficient and stable all-inorganic perovskite solar cells and modules

Crystallization and Defect Chemistry Dual Engineering for MAPbI 3 Perovskite Solar Cells with Efficiency Approaching 22%

Fabrication of highly efficient and ambient stable planar MAPbI3 perovskite solar cells via defect passivation through crosslinking strategy

Thermally stable inverted perovskite solar cells using an electropolymerized Zn-porphyrin film as a dopant-free hole-transporting layer

Perovskite Solar Cells with 18.21% Efficiency and Area over 1 Cm(2) Fabricated by Heterojunction Engineering

Interface Engineering of Low Temperature Processed All-Inorganic CsPbI2Br Perovskite Solar Cells Toward PCE Exceeding 14%

Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells