Abstract:In recent years, air-processed MAPbI3 perovskite solar cells (PSCs) have attracted widespread interest from researchers worldwide because of their simple and low-cost fabrication process. Nonetheless, the ambient conditions usually bring about many adverse effects, such as imperfect crystallization and numerous defects in perovskite films, which seriously impact both the photoelectric performance and stability of the device. Therefore, in this work, a polymer dual-passivation strategy was employed by introducing ammonium polyphosphate (APP) as an additive to the green anti-solvent to accurately modify the perovskite layer. APP, which has abundant phosphate and ammonium groups, could simultaneously fill the I/Pb vacancies by Lewis acid-base reactions to restrain defect formation and improve the power conversion efficiency (PCE) of the ultimate device. On the other hand, the long molecular chains of the polymer with a certain flexural ability were easily congregated at the grain boundaries of the perovskite grains, thus enhancing the bending resistance. Consequently, high-quality perovskite films with a dense morphology and large grain size were obtained. Because of the reduced defect density and suppressed non-radiative recombination, the optimal PSC attained a champion PCE of 20.87% with negligible hysteresis. Furthermore, the non-encapsulated APP-modified flexible device also exhibited excellent bending resistance. Only 20% of its normalized PCE was lost after 150 bending cycles at room temperature. This simple, green, low-cost, and reliable strategy for preparing high-efficiency PSCs with good stability can facilitate its commercialization.

Low-Temperature robust MAPbI 3 perovskite solar cells with power conversion efficiency exceeding 22.4%

Low-temperature Preparation Achieving 10.95%-Efficiency of Hole-Free and Carbon-Based All-Inorganic CsPbI3 Perovskite Solar Cells

Evolved Photovoltaic Performance of MAPbI3 3 and FAPbI3-based 3-Based Perovskite Solar Cells in Low- Temperatures

Evolved Photovoltaic Performance of MAPbI3 and FAPbI3-based Perovskite Solar Cells in Low-Temperatures

High Performance Inverted RbCsFAPbI3 Perovskite Solar Cells Based on Interface Engineering and Defects Passivation.

Self-Elimination of Intrinsic Defects Improves the Low-Temperature Performance of Perovskite Photovoltaics

Thermally Stable Mapbi(3) Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 Cm(2) Achieved by Additive Engineering

Interface Engineering of Low Temperature Processed All-Inorganic CsPbI2Br Perovskite Solar Cells Toward PCE Exceeding 14%

Area: Perovskite solar cells HIGH EFFICIENT AND STABLE MAPBI3 BASED PEROVSKITE SOLAR CELLS

Wide-bandgap MAPbBr 3 perovskite solar cells using bifunctional-molecule additives achieving a high open-circuit voltage of 1.63 V

Efficient and Stable Large Bandgap MAPbBr<sub>3</sub> Perovskite Solar Cell Attaining an Open Circuit Voltage of 1.65 V

Low‐Temperature Crystallization of CsPbIBr 2 Perovskite for High Performance Solar Cells

Understanding Temperature‐Dependent Charge Extraction and Trapping in Perovskite Solar Cells

Air-processed MAPbI3 Perovskite Solar Cells Achieve 20.87% Efficiency and Excellent Bending Resistance Enabled Via a Polymer Dual-Passivation Strategy.

High-Performance and Stable Mesoporous Perovskite Solar Cells Via Well-Crystallized FA0.85MA0.15Pb(I0.8Br0.2)3.

Air-processed MAPbI3 perovskite solar cells achieve 20.87% efficiency and excellent bending resistance enabled via polymer dual-passivation strategy

Stabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking

Interfacial Energy Level Tuning for Efficient and Thermostable CsPbI2Br Perovskite Solar Cells

Efficient and stable planar MAPbI3 perovskite solar cells based on a small molecule passivator

Temperature‐Insensitive Efficient Inorganic Perovskite Photovoltaics by Bulk Heterojunctions

Highly efficient flexible MAPbI3 solar cells with a fullerene derivative-modified SnO2 layer as the electron transport layer