Abstract:Low‐bandgap (LBG, Eg∼1.25 eV) tin‐lead (Sn‐Pb) perovskite solar cells (PSCs) play critical roles in constructing efficient all‐perovskite tandem solar cells (TSCs) that can surpass the efficiency limit of single‐junction solar cells. However, the traditional poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) hole transport layer (HTL) in LBG PSCs usually restricts device efficiency and stability. Here, we report a strategy of employing 2‐aminoethanesulfonic acid (i.e., taurine) as the interface bridge to fabricate efficient HTL‐free LBG PSCs with improved optoelectronic properties of the perovskite absorbers at the buried contacts. Taurine‐modified ITO substrate has lower optical losses, better energy level alignment, and higher charge transfer capability than PEDOT:PSS HTL, leading to significantly improved open‐circuit voltage (VOC) and short‐circuit current density of corresponding devices. The best‐performing LBG PSC with a power conversion efficiency (PCE) of 22.50% and an impressive VOC of 0.911 V has been realized, enabling all‐perovskite TSCs with an efficiency of 26.03%. The taurine‐based HTL‐free TSCs have highly increased stability, retaining more than 90% and 80% of their initial PCEs after constant operation under 1‐sun illumination for 600 h and under 55 °C thermal stress for 950 h, respectively. This work provides a facile strategy for fabricating efficient and stable perovskite devices with a simplified HTL‐free architecture. This article is protected by copyright. All rights reserved

Highly-efficient and low-temperature perovskite solar cells by employing a Bi-hole transport layer consisting of vanadium oxide and copper phthalocyanine.

Highly Efficient p-i-n Perovskite Solar Cells Utilizing Novel Low-Temperature Solution-Processed Hole Transport Materials with Linear π-Conjugated Structure

Highly Efficient and Stable Perovskite Solar Cells Via a Multifunctional Hole Transporting Material

Hole Transport Layer‐Free Low‐Bandgap Perovskite Solar Cells for Efficient All‐Perovskite Tandems

Stable Inverted Planar Perovskite Solar Cells with Low‐Temperature‐Processed Hole‐Transport Bilayer

Highly Efficient Perovskite Solar Cell Based on PVK Hole Transport Layer

High-performance and stable inverted perovskite solar cells using low-temperature solution-processed CuNbOx hole transport layer

Highly Stable and Efficient Perovskite Solar Cells with 22.0% Efficiency Based on Inorganic–Organic Dopant‐Free Double Hole Transporting Layers

Low‐Temperature Solution‐Processed CuCrO2 Hole‐Transporting Layer for Efficient and Photostable Perovskite Solar Cells

Hole-Transporting Low-Dimensional Perovskite for Enhancing Photovoltaic Performance

Enhancing the Performance of Perovskite Solar Cell Via Optimizing the Solvent of Hole Transport Layer

Thermally stable inverted perovskite solar cells using an electropolymerized Zn-porphyrin film as a dopant-free hole-transporting layer

Binary Hole Transport Layer Enables Stable Perovskite Solar Cells with PCE Exceeding 24%

Stable and Efficient 3D-2D Perovskite-Perovskite Planar Heterojunction Solar Cell without Organic Hole Transport Layer

Over 20% PCE Perovskite Solar Cells with Superior Stability Achieved by Novel and Low-Cost Hole-Transporting Materials

All-vacuum deposited and thermally stable perovskite solar cells with F4-TCNQ/CuPc hole transport layer

Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells

High-Performance Inverted Planar Perovskite Solar Cells Enhanced by Thickness Tuning of New Dopant-Free Hole Transporting Layer

Efficient Carbon-Based CsPbBr3 Inorganic Perovskite Solar Cells by Using Cu-Phthalocyanine as Hole Transport Material

Acylhydrazone-based Porphyrin Derivative As Hole Transport Material for Efficient and Thermally Stable Perovskite Solar Cells

An Ultrathin Ferroelectric Perovskite Oxide Layer For High-Performance Hole Transport Material Free Carbon Based Halide Perovskite Solar Cells