Abstract:Metal halide inorganic perovskite solar cells (PSCs) are of great potential to achieve high efficiency with excellent thermal stability. However, the surface defect traps restrain the achievement of high open circuit voltage (VOC) and power conversion efficiency (PCE) of the devices due to the severe nonradiative charge recombination. Moreover, the state‐of‐the‐art hole transporting layer (HTL) significantly hampers device moisture stability, even though it renders the highest solar cell efficiency. Herein, a one‐stone‐two‐birds strategy is proposed using a bio‐compatible material tryptamine (TA) as an additive in HTL. Firstly, TA bearing electron rich moieties can favorably passivate the surface defects of inorganic perovskite films, significantly reducing trap density and prolonging charge lifetime. It results in a drastic improvement of VOC from 1.192 V to 1.251 V, with a VOC loss of 0.48 V. The corresponding PSCs achieve a 21.8% PCE under 100 mW cm−2 illumination. Secondly, TA in HTL can coordinate with lithium cations, retarding their reaction with moisture and increasing the moisture stability of HTL. Consequently, the black phase of inorganic perovskite films is well preserved, and the corresponding PSCs maintain 90% of the initial PCE after 800 h storage at relative humidity of 25–35%, much higher than the control devices. This article is protected by copyright. All rights reserved

What problem does this paper attempt to address?

This paper aims to solve two main problems in inorganic perovskite solar cells (PSCs): 1. **Surface defect traps**: A large number of defect traps on the surface of inorganic perovskite materials will severely limit the open - circuit voltage (\( V_{OC} \)) and power conversion efficiency (PCE) of the device, because these defects will lead to severe non - radiative charge recombination. Specifically, these defects can capture free charge carriers, resulting in energy loss. 2. **Humidity stability**: Although the current state - of - the - art hole - transport layer (HTL) can achieve the highest solar cell efficiency, it significantly hinders the humidity stability of the device. In particular, the lithium - salt - doped HTL (such as LiTFSI - doped Spiro - OMeTAD) will accelerate the degradation of perovskite materials after absorbing moisture in the air, resulting in a decline in device performance. To solve these two problems simultaneously, the author proposes a method of using the biocompatible material tryptamine (TA) as an HTL additive. TA has the following two functions: - **Defect passivation**: The electron - rich groups in TA molecules can effectively passivate the defects on the surface of inorganic perovskite films, significantly reduce the trap density, and prolong the charge lifetime. This enables the open - circuit voltage of the device to increase from 1.192 V to 1.251 V, and the corresponding PCE reaches 21.8%. - **Lithium - ion coordination**: TA can coordinate with lithium ions in the HTL, slow down the reaction between lithium ions and moisture, and thus improve the humidity stability of the HTL. The experimental results show that the PSCs treated with TA can still maintain 90% of the initial PCE after being stored for 800 hours in an environment with a relative humidity of 25 - 35%. Through this method, the author not only improves the photoelectric conversion efficiency of PSCs, but also significantly improves their long - term stability and humidity stability.

Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells

Defect Passivation and Electrical Conductivity Enhancement in Perovskite Solar Cells Using Functionalized Graphene Quantum Dots

Surface passivation of perovskite with organic hole transport materials for highly efficient and stable perovskite solar cells

Two-dimensional phthalocyanine-based molecular additives realize efficient hole transport and enhanced ion immobilization for durable perovskite solar cells

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Surface Defect Passivation and Energy Level Alignment Engineering with a Fluorine-Substituted Hole Transport Material for Efficient Perovskite Solar Cells

Thiazole‐Modified C3N4 Interfacial Layer for Defect Passivation and Charge Transport Promotion in Perovskite Solar Cells

Molecularly Tailored Surface Defect Modifier for Efficient and Stable Perovskite Solar Cells

Multifunctional Thiophene-Based Interfacial Passivating Layer for High-Performance Perovskite Solar Cells

Vacancies substitution induced interfacial dipole formation and defect passivation for highly stable perovskite solar cells

Dimensionality-Controlled Surface Passivation for Enhancing Performance and Stability of Perovskite Solar Cells via Triethylenetetramine Vapor

Passivation functionalized phenothiazine-based hole transport material for highly efficient perovskite solar cell with efficiency exceeding 22%

Tri(4-trifluoromethylphenyl)phosphine-Modified Hole-Transport Material PTAA to Improve the Performance of Perovskite Solar Cells

Synergistic Effect of Fluorinated Passivator and Hole Transport Dopant Enables Stable Perovskite Solar Cells with an Efficiency Near 24%

Internal Interactions between Mixed Bulky Organic Cations on Passivating Defects in Perovskite Solar Cells

Managing Multiple Halide-Related Defects for Efficient and Stable Inorganic Perovskite Solar Cells

Introduction of Multifunctional Triphenylamino Derivatives at the Perovskite/HTL Interface To Promote Efficiency and Stability of Perovskite Solar Cells

Thiazole‐Modified C 3 N 4 Interfacial Layer for Defect Passivation and Charge Transport Promotion in Perovskite Solar Cells

Dual Functions of Defect Passivation and Hole Transport Dopant Enabled by Piperidyl Zwitterion for Stable and Efficient Perovskite Solar Cells

Efficient Defect Passivation for Perovskite Solar Cells by Controlling the Electron Density Distribution of Donor‐π‐Acceptor Molecules

Targeted passivation and optimized interfacial carrier dynamics improving the efficiency and stability of hole transport layer-free narrow-bandgap perovskite solar cells