Abstract:Interface engineering has become a critical process to fabricate efficient and stable planar heterojunction perovskite solar cells (PSCs), as the degradation of perovskite, hysteresis, and photo and thermal instability can all be triggered by the defective interfaces of PSCs. Herein, two fullerene derivatives, NMPPF and NMTTF, have been designed as interlayers between the MAPbI3 and TiO2 electron transport layer. The thiophene terminals of NMTTF have been found to effectively passivate the uncoordinated Pb2+ of perovskite, reducing trap density and charge recombination of PSCs as well as facilitating charge transport at the perovskite and TiO2 interface. Compared to the reference MAPbI3 PSC with a maximum power conversion efficiency (PCEmax) of 18.7% and serious hysteresis (ΔPCE = 7.2%), PSCs incorporating NMTTF achieve a PCEmax of 19.5% with minor hysteresis (ΔPCE = 1.2%) and outperform the performance of NMPPF (PCEmax = 18.0%, ΔPCE = 2.3%) and PC61BM (PCEmax = 18.9%, ΔPCE = 1.4%) modified PSCs. Unencapsulated PSCs adopting these NMPPF and NMTTF interlayers also exhibit good storage stability, maintaining 80% of their initial PCEs after storing in ambient for 30 days. This work demonstrates that the thiophene moiety can be an efficient defect passivation unit to design new fullerene molecules for interfacial engineering of PSCs with high efficiency and stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01491?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01491</a>.Synthesis of NMPPF/NMTTF fullerene molecules, PL and UV–vis spectra, dark J–V curves to calculate mobility and conductivity, EQE of PSCs without and with an NMPPF or NMTTF interlayer, water contact angle measurements, PCE evolution of unencapsulated PSCs in ambient condition, and Nyquist plots of PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01491/suppl_file/ae0c01491_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly efficient flexible MAPbI3 solar cells with a fullerene derivative-modified SnO2 layer as the electron transport layer

Highly efficient flexible MAPbI<sub>3</sub> solar cells with a fullerene derivative-modified SnO<sub>2</sub> layer as the electron transport layer

Low-temperature Preparation Achieving 10.95%-Efficiency of Hole-Free and Carbon-Based All-Inorganic CsPbI3 Perovskite Solar Cells

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

Air-processed MAPbI3 perovskite solar cells achieve 20.87% efficiency and excellent bending resistance enabled via polymer dual-passivation strategy

Flexible Narrow Bandgap Sn-Pb Perovskite Solar Cells with 21% Efficiency Using N , N '-Carbonyldiimidazole Treatments

Fapbi(3) Flexible Solar Cells With A Record Efficiency Of 19.38% Fabricated In Air Via Ligand And Additive Synergetic Process

Enhanced flexibility and light utilization for high-efficiency all-air-processed carbon-based perovskite solar cells

Flexible All-Perovskite Tandem Solar Cells Approaching 25% Efficiency with Molecule-Bridged Hole-Selective Contact

SnO2 Surface Modification and Perovskite Buried Interface Passivation by 2,5‐Furandicarboxylic Acid for Flexible Perovskite Solar Cells

Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility.

Stable Inverted Planar Perovskite Solar Cells with Low‐Temperature‐Processed Hole‐Transport Bilayer

Efficient and bending durable flexible perovskite solar cells via interface modification using a combination of thin MoS2 nanosheets and molecules binding to the perovskite

Active SnO2 Crystal Planes Enable Efficient and Ultra‐Bendable n‐i‐p Perovskite Solar Cells with Record Certificated Power Conversion Efficiency

Highest‐Efficiency Flexible Perovskite Solar Module by Interface Engineering for Efficient Charge‐Transfer

Thiophene Terminated Fullerene Derivatives for Interfacial Modification toward High Efficiency MAPbI 3 Perovskite Solar Cells

Highly efficient flexible perovskite solar cells with vacuum-assisted low-temperature annealed SnO2 electron transport layer

Ameliorating the Interfacial Mismatch of SnO2 and Perovskite Enabling High Mechanical Stability for Flexible Perovskite Solar Cells

Elimination of Charge Transport Layers in High-Performance Perovskite Solar Cells by Band Bending

Selective Chemical Etching to Remove 0D Cs4Pb(IBr)6 from Mixed‐Dimensional Perovskite Surface Achieving High Efficiency Flexible All‐Inorganic Perovskite Solar Cells with Superior Mechanical Durability

Dual-interface Engineering Induced by Silane Coupling Agents with Different Functional Groups Constructing High-Performance Flexible Perovskite Solar Cells