All-inorganic, Hole-Transporting-layer-free, Carbon-Based CsPbIBr2 Planar Solar Cells with ZnO As Electron-Transporting Materials

Cheng Wang,Junsen Zhang,Liangxing Jiang,Li Gong,Haipeng Xie,Yongli Gao,Haiping He,Zhishan Fang,Jincheng Fan,Zisheng Chao
DOI: https://doi.org/10.1016/j.jallcom.2019.152768
IF: 6.2
2019-01-01
Journal of Alloys and Compounds
Abstract:In this paper, all-inorganic, hole-transporting-layer-free (HTLF), carbon-based CsPbIBr2 planar solar cells with zinc oxide (ZnO) as electron-transporting materials (ETMs) were studied for the first time. The reported all-inorganic, HTLF, carbon-based cesium lead iodide dibromide (CsPbIBr2) solar cells used titanium dioxide (TiO2) as ETMs, which usually required a high sintering temperature of 500 degrees C. Here, ZnO ETMs were annealed at 120 degrees C. The highest power conversion efficiency (PCE) of 7.60%, with a short-circuit current (J(sc)) of 11.60 mA/cm(2), an open-circuit voltage (V-oc) of 1.03 V and the fill factor (FF) of 0.63, was obtained. Furthermore, the thermal and humid stabilities of the solar cells were studied. The perovskite solar cells were placed at 10% humidity and room temperature for 624 h and the PCE of perovskite solar cells only decreased by 10%. While the perovskite solar cells were placed at 80 degrees C and 0% humidity for 192 h, the PCE of the solar cells decreased by 4%. (C) 2019 Elsevier B.V. All rights reserved.
What problem does this paper attempt to address?