Abstract:The effect of cold rolling and annealing on texture development and mechanical behavior of Zircaloy-4 alloy plates was systematically investigated in the present work. The as-received plates were subjected to cold rolling with thickness reductions of 33% and 66%. Electron back-scatter diffraction and tensile tests were performed to reveal the texture and mechanical properties, respectively. Results showed that a bimodal texture was featured in the as-received plate and the texture was a fiber that spread from <<math>101¯0</math>> to <<math>112¯0</math>>. After cold rolling and annealing, a fiber with a continuous distribution from <<math>101¯0</math>> to <<math>112¯0</math>> and a fiber with a maximum at the <<math>112¯0</math>> position were present in the plates with thickness reductions of 33% and 66%. Besides, the existence of {<math>0001</math>} basal fiber was noticed, indicating more basal poles oriented toward the normal direction. Tensile tests showed that the recrystallized plate with 66% thickness reduction was more ductile and less strong than that with 33% reduction. Meanwhile, tensile properties were sensitive to strain rate, loading direction and thickness reduction. Moreover, the relationship between texture development and yield strength was discussed based on Schmid theory. Calculated results indicated that prismatic <a> slip was the predominant deformation mode and its Schmid factor values under different loading directions contributed to the anisotropy of yield strength. Due to the texture development during cold rolling and annealing, the averaged SF values for prismatic <a> slip changed with the increased thickness reduction, resulting in the variation of yield strength.</a></a>

Concurrent Inheritance of Microstructure and Texture after Slow Β→α Cooling of Commercially Pure Zr

Effects of β-cooling rates on microstructural characteristics and hardness variation of a dual-phase Zr alloy

Effect of Cooling Process on the Formation of Duplex Microstructure in Zr–2.3Nb Alloy

The Effect of Cooling Rate on Microstructure and Mechanical Properties of the Zr-4Hf-3Nb (wt%) Alloy

Texture Evolution and Temperature-Dependent Deformation Modes in Ambient- and Cryogenic-Rolled Nanolayered Zr-2.5Nb

Study of cold deformation and low temperature annealing textures in Zr-Nb alloy sheet

Cooling Rate Dependent As-Cast Microstructure and Mechanical Properties of Zr-based Metallic Glasses

Effect of cooling rate on α variant selection and microstructure evolution in a near β Ti–5Al–3Mo–3V–2Cr–2Zr–1Nb–1Fe alloy

Effect of Deformation and Heat Treatment on the Microstructure and Mechanical Properties of Β-Zr40ti5al4v Alloy

Recrystallization Texture Evolution of Cold-Rolled Cu Foils Governed by Microstructural and Sample Geometrical Factors During Heating

Molecular Dynamics Study on Microstructural Evolution During Crystallization of Rapidly Supercooled Zirconium Melts

Microstructure and Corrosion Behavior of a Zr-Sn-Nb-Fe-Cu-O Alloy Fabricated by Α+β Quenching Processing

Microstructure and Properties of Rapidly Solidified Cu-0.81cr-0.12zr Alloy

Deformation behavior and Microstructural evolution of Zr‐Sn‐Nb‐Fe alloy over a wide temperature range based on the law of mixture

Effect of heating rate on the recrystallization behavior and mechanical properties of a cold-rolled Zr702

Microstructure evolutions of the Al-Mg and Al-Mg-Sc-Zr alloys during gradient cooling

Evolution of texture and intergranular stresses of αZr and minority phases in Zr-2.5Nb pressure tube through synchrotron X-ray diffraction

Effect of cold rolling on microstructure and mechanical properties of pure Zr

Texture development and mechanical behavior of Zircaloy-4 alloy plates fabricated by cold rolling and annealing

Nucleation and Growth of Nanoscale Precipitates and the Effect on Properties During Secondary Isothermal Aging in Thin-Band of Cu–0.8Cr–0.1Zr Alloy

Hot Deformation Behavior and Microstructure Evolution of a Novel High-Zn Containing Al-Zn-Mg-Cu-Zr Alloy