Abstract:Although many efforts have been made on understanding the variant selection rules, the interplay of these rules and their combined effects on variant selection have not been well addressed. In this work, variant selection and morphology by the different cooling rates in Zr-xNb-0.4Mo (x=0.2, 0.6 and 1.0 wt.%) alloys are characterized using scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) technique. The results show that the variation of variant selection and morphology is attributed to the Nb content, the parent β grain size, the cooling rate, the β grain boundary (GB) characteristics and the interplay among them. The Nb addition (Nb≤0.6 wt.%) decreases the average grain size of parent β grains, and the smaller parent β grain size generally results in the larger degree of variant selection (DVS) values in the individual parent β grain due to their resistance to the uniform nucleation and growth of α-variants. The slow cooling rate promotes the diffusional transformation and favors the formation of special β GBs and the β GBs with high dislocation density, which usually lead to a stronger DVS in the individual parent β grains. The very large weighted area percentage of α-variant in the individual parent β grains, which accounts for the stronger DVS in the individual parent β grains, is due to the special β GBs, the β GBs with high dislocation density and the incomplete martensitic transformation (martensitic-diffusional mixed transformation). The β GB with high dislocation density has a larger contribution to the strong DVS of individual parent β grains than the special β GB. In addition, the result shows that the low density of statistically stored dislocations (SSDs) can inhibit the nucleation and growth of the α-variant produced by the special β GB.

Effect of Cooling Process on the Formation of Duplex Microstructure in Zr–2.3Nb Alloy

Effect of Nb and Cu on α/β Phase Transition Temperature and Corrosion Behavior of New Type Zirconium Alloys

Effect of annealing treatment on the microstructure and mechanical properties of a duplex Zr-2.5Nb alloy

Formation of Duplex Microstructure in Zr–2.3Nb Alloy and Its Plastic Behaviour at Various Strain Rates

Effect of intercritical annealing temperature on microstructure and mechanical properties of duplex Zr-2.5Nb alloy

The Effect of Cooling Rate on Microstructure and Mechanical Properties of the Zr-4Hf-3Nb (wt%) Alloy

Effects of β-cooling rates on microstructural characteristics and hardness variation of a dual-phase Zr alloy

Achieving high strength and toughness in a Zr-2.3Nb alloy by the formation of duplex microstructure

Designing Hetero-Structured Ultra-Strong and Ductile Zr-2.5Nb Alloys: Utilizing the Grain Size-Dependent Martensite Transformation During Quenching

Concurrent Inheritance of Microstructure and Texture after Slow Β→α Cooling of Commercially Pure Zr

Effects of the cooling rate on mechanical properties and microstructure of near- α Ti-6Al-3Zr-2Nb-Mo alloy

The microstructure, fracture mechanism and their correlation with the mechanical properties of as-cast Mg-Nd-Zn-Zr alloy under the effect of cooling rate

Influence of Multiphase Microstructure on the Strength and Ductility of Nb-Zr-Ti-V Refractory High Entropy Alloys

Variation of Microstructural Features on the Tensile Property and Corrosion Resistance of Zr-Sn-Nb-Fe-Cu Alloy

Effect of Low-Temperature Pre-Deformation on Precipitation Behavior and Microstructure of A Zr-Sn-Nb-Fe-Cu-O Alloy During Fabrication

Effect of cooling rates on as-cast microstructures of U-5.4Nb alloys

Effects of cooling manner on Laves phase precipitation and mechanical properties of Al modified super ferritic stainless steels

Influence of cooling rate on phase precipitation and deformation mechanism of a novel metastable titanium alloy

An excellent synergy in yield strength and plasticity of NbTiZrTa 0.25 Cr 0.4 refractory high entropy alloy through the regulation of cooling rates

Effect of Hot Rolled Cooling Process on Structure and Properties of Nb-Ti Microalloy Dual Phase Steel

Variant selection and morphology by the different cooling rates in Zr-xNb-0.4Mo alloys