Abstract:The use of dispersed precipitates is an effective method for strengthening metals, but it typically results in a reduction in ductility. A potential way to overcome this strength-ductility trade-off is through the incorporation of coherent nanoscale deformable precipitates. Here, we present an approach of designing and fabricating a niobium-based (Nb-5W-2Mo-1Zr, Nb521) alloy with copiously and semi-coherently dispersed nanoscale zirconia (ZrO2) precipitates through laser powder bed fusion followed by heat treating. The intergranular ZrO2 precipitates at grain boundaries underwent tetragonal-to-monoclinic martensitic phase transformation and deformation twinning, while the intragranular ZrO2 precipitates within the matrix experienced deformation twinning and substantial plastic deformation during tension. The combination of transformation induced plasticity (TRIP) and twinning induced plasticity (TWIP) from the nanoscale ZrO2 precipitates provides sufficient capacity to accommodate strain and relieve stress concentration. Additionally, the intragranular ZrO2 precipitates effectively piled up incoming dislocations from the Nb matrix to form high-density dislocation networks during tension, which interacted with each other via the Orowan mechanism and finally resulted in its significant plastic deformation. These mechanisms contribute to the exceptional tensile properties of the Nb521 alloy, including an ultimate strength of 628.7 +/- 2.3 MPa and a ductility of 17.8 +/- 0.6% with a superior work-hardening capacity (similar to 230 MPa), achieving a record of strength and ductility combination for the Nb521 alloys fabricated by additive manufacturing to date. This strategy represents a promising approach for designing dispersion-strengthened refractory alloys with excellent synergy of strength and ductility.

Achieving high strength and toughness in a Zr-2.3Nb alloy by the formation of duplex microstructure

Formation of Duplex Microstructure in Zr–2.3Nb Alloy and Its Plastic Behaviour at Various Strain Rates

Effect of Cooling Process on the Formation of Duplex Microstructure in Zr–2.3Nb Alloy

Effect of annealing treatment on the microstructure and mechanical properties of a duplex Zr-2.5Nb alloy

Effect of intercritical annealing temperature on microstructure and mechanical properties of duplex Zr-2.5Nb alloy

Designing Hetero-Structured Ultra-Strong and Ductile Zr-2.5Nb Alloys: Utilizing the Grain Size-Dependent Martensite Transformation During Quenching

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Strong and Ductile Niobium-Based Refractory Alloy Via Deformable Zirconia Nanoparticles

Microstructure and Mechanical Properties of ZrB2–Nb Composite

Hierarchical Nanolayered Structures-Enabled Record-High Fracture Resistant Zircaloy

Balancing the fracture toughness and tensile strength by multiple additions of Zr and Y in Nb–Si based alloys

Hierarchical 3D Nanolayered Duplex-Phase Zr with High Strength, Strain Hardening, and Ductility.

Achieving Strength-Ductility Synergy in Zirconium Via Ultra-Dense Twin-Twin Networks

Insight into Microstructure Evolution of In-Situ ZrB2np/AA6111 Composites with Both Excellent Room and High Temperature Properties

High Strength in High Nb Containing Tial Alloy Sheet with Fine Duplex Microstructure Produced by Hot Pack Rolling

Microstructure tailoring and impact toughness of a newly developed high strength Ti-5Al-3Mo-3V-2Cr-2Zr-1Nb-1Fe alloy

High Strength and Ductility in Multimodal-Structured Zr

Microstructural morphology effects on fracture toughness and crack growth behaviors in a high strength titanium alloy

Enhancing Fracture Toughness of Fine-Grained Zr Via Forming Nanoscale Defect Structures

High Fracture Toughness in a Hierarchical Nanostructured Zirconium

Influence of Multiphase Microstructure on the Strength and Ductility of Nb-Zr-Ti-V Refractory High Entropy Alloys