Abstract:Cu(In,Ga)Se<sub>2</sub> (CIGS) solar cells attract intense interest both in research and industry fields due to their high power conversion efficiencies, low costs, and high stabilities. The power conversion efficiency of a CIGS solar cell is limited by the deep level defects distributed on the surface and in the bulk of the CIGS solar cells. In this work, we elucidate that the deep level defects are significantly suppressed during the CdS buffer layer deposition process via a chemical bath deposition (CBD) method. The X-ray photoelectron spectroscopy results show the incorporation of cadmium (Cd) into CIGS during the CdS deposition process, which is the main reason for the reduced deep level nonradiative recombination defects. Raman spectroscopy and secondary ion mass spectroscopy further reveal the reduction of nonradiative recombination deep level defects due to Cd incorporation. Besides, the high-resistivity i-ZnO layer provides field-effect passivation, leading to the enhancement of the power conversion efficiency from 11.0 to 12.1%. By a combination of the incorporation of Cd, i-ZnO passivation, and optimization of the band gap of CIGS, the champion power conversion efficiency of the CIGS solar cell is as high as 15.5% without an antireflective layer and alkali metal postdeposition treatment. Our results provide insights into the effect of the CdS buffer layer, CBD method, and high-resistivity i-ZnO layer on the performance of CIGS solar cells, which is quite helpful to further improve the power conversion efficiency of CIGS solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01930?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01930</a>.CIGS coevaporation deposition process; CdS CBD deposition; characterizations; top-view SEM images of CdS deposited via chemical bath deposition for different times; XRD pattern of CdS fabricated via a CBD method at 80 °C for 12 min; parameters for the simulations of the performance of CIGS solar cells with different thicknesses of i-ZnO; and EQE curves of CIGS solar cell obtained at 0, 0.5, −0.5, and 1 V DC voltage bias (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01930/suppl_file/ae0c01930_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Low-Pollution and Controllable Selective-Area Deposition of A Cds Buffering Layer on Cigs Solar Cells by A Photochemical Technique

High-efficiency Sb2Se3 thin-film solar cells based on Cd(S,O) buffer layers prepared via spin-coating

High-Efficiency Cu(In,Ga)Se₂ Thin Film Solar Cells Using ZnS and CdS Buffer Layers

Mechanism‐Based Approach of CdS/Cu(In,Ga)Se2 (CIGS) Interfaces for CIGS Solar Cells Through Deposition in Different Stages of Continuous Chemical Bath Deposition Reaction: Key to Achieving High Photovoltaic Performance

Comprehensive Analysis of CdS Ultrathin Films Modified by the Substrate Position inside the Reactor Container Using the CBD Technique

Unlocking the Effects of Cu Doping in Heavy-Metal-free AgIn5S8 Quantum Dots for Highly Efficient Photoelectrochemical Solar Energy Conversion

Sb2Se3 solar cells employing metal-organic solution coated CdS buffer layer

Realizing zinc-doping of CdS buffer layer via partial electrolyte treatment to improve the efficiency of Cu2ZnSnS4 solar cells

A Cd-reduced Hybrid Buffer Layer of CdS/Zn(O,S) for Environmentally Friendly CIGS Solar Cells

Influence of Deposition Parameters on Performance of Zn(O,S) Buffer Layer Deposited by Solution-Based Continuous Flow Reactor for CIGS Solar Cells

Interface Engineering for High-Efficiency Solution-Processed Cu(In,Ga)(S,Se)2 Solar Cells via a Novel Indium-Doped CdS Strategy

Cu(In,Ga)Se2 Solar Cells with Double Layered Buffers Grown by Chemical Bath Deposition

Efficiency Enhancement of CIGS Solar Cells via Recombination Passivation

Reactively Sputtered CdS:O Buffer Layers for Substrate Sb2Se3 Solar Cells

Optimal CdS Buffer Thickness to Form High-Quality CdS/Cu(In,Ga)Se 2 Junctions in Solar Cells without Plasma Damage and Shunt Paths.

Study on the Performance of Oxygen-Rich Zn(O,S) Buffers Fabricated by Sputtering Deposition and Zn(O,S)/Cu(In,Ga)(S,Se) 2 Interfaces

Performance Improvement of Solution-Processed CdS/CdTe Solar Cells with a Thin Compact TiO2 Buffer Layer

Band-aligned C 3 N 4 − Xs 3 X / 2 Stabilizes CdS / CuInGaS 2 Photocathodes for Efficient Water Reduction

Molecular Beam Epitaxy Deposition of In Situ O‐Doped CdS Films for Highly Efficient Sb2(S,Se)3 Solar Cells

Enhancing the properties of Cd-free MgZnS buffer for solar cells by co-sputtering ZnS and Mg targets

Self-passivated CdS Buffer Layer for Antimony Sulfide Solar Cells