Abstract:Abstract Transistors on aligned semiconducting carbon nanotubes (A-CNTs) have been considered a promising substitute for mainstream Si transistors to extend integrated circuit (IC) technology owing to their potential advantages of easy miniaturization and high energy efficiency, but whether A-CNT FETs can be scalably fabricated with ultrascaled whole dimensions while maintaining high performance remains questionable. Here, we explore the whole size scaling down potential of A-CNT transistors and demonstrate the possibility of implementing such small-geometry transistors in ultra-large-scale ICs that consist of billions of transistors. A-CNT transistors with a contacted gate pitch (CGP) of 175 nm have been achieved by simultaneously scaling the gate length and the contact length, and exhibit an on-current of 2.24 mA/μm and a peak transconductance of 1.64 mS/μm, surpassing silicon 45 nm node transistors in terms of both size and electronic performance. A static random-access memory (SRAM) cell has been built using six A-CNT transistors in an area of 0.967 μm2, which is comparable to the commercial silicon 90 nm technology node and is the smallest SRAM cell based on non-Si semiconductors. Furthermore, a full-contact structure is introduced between the metal and A-CNTs to achieve a contact resistance as low as 90 Ω·μm and to reduce the dependence on the contact length. A-CNT transistors downsized to a CGP of 55 nm (corresponding to the silicon 10 nm technology node) have been demonstrated to outperform 10 nm Si MOS transistors in terms of carrier mobility and Fermi velocity, indicating the tremendous potential of A-CNT transistors in high-performance digital ICs of sub 10 nm nodes.

Carbon Nanotube Network Film-Based Ring Oscillators with Sub 10-Ns Propagation Time and Their Applications in Radio-Frequency Signal Transmission

Carbon Nanotube Film-Based Radio Frequency Transistors with Maximum Oscillation Frequency above 100 GHz.

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Carbon nanotube radio-frequency electronics

Gigahertz Integrated Circuits Based on Carbon Nanotube Films

Carbon Nanotube Materials for Future Integrated Circuit Applications

Carbon nanotube-based flexible high-speed circuits with sub-nanosecond stage delays

Aligned carbon nanotube integrated circuit downsizing toward a sub-10 nm node

Carbon Nanotube Based Radio Frequency Transistors For K-Band Amplifiers

CNT Electronics: Advances in High‐Performance Carbon‐Nanotube Thin‐Film Electronics (adv. Electron. Mater. 8/2019)

Terahertz metal-oxide-semiconductor transistors based on aligned carbon nanotube arrays

Low-voltage High-Performance Flexible Digital and Analog Circuits Based on Ultrahigh-Purity Semiconducting Carbon Nanotubes

Highly Temperature-Stable Carbon Nanotube Transistors and Gigahertz Integrated Circuits for Cryogenic Electronics

Carbon Nanotube Complementary Gigahertz Integrated Circuits and Their Applications on Wireless Sensor Interface Systems.

Radiofrequency Transistors Based on Aligned Carbon Nanotube Arrays

High-Speed Logic Integrated Circuits with Solution-Processed Self-Assembled Carbon Nanotubes

Radio frequency analog electronics based on carbon nanotube transistors

High-Performance Carbon Nanotube Optoelectronic Transistor With Optimized Process for 3D Communication Circuit Applications

Improving Carbon Nanotube-Based Radiofrequency Field-Effect Transistors by the Device Architecture and Doping Process.

High-Performance Complementary Transistors and Medium-Scale Integrated Circuits Based on Carbon Nanotube Thin Films.

Flexible CMOS Integrated Circuits Based on Carbon Nanotubes with Sub-10 Ns Stage Delays