Abstract:Carbon nanotube field-effect transistors (CNT FETs) have been demonstrated to exhibit high performance only through low-temperature fabrication process and require a low thermal budget to construct monolithic three-dimensional (M3D) integrated circuits (ICs), which have been considered a promising technology to meet the demands of high-bandwidth computing and fully functional integration. However, the lack of high-quality CNT materials at the upper layer and a low-parasitic interlayer dielectric (ILD) makes the reported M3D CNT FETs and ICs unable to provide the predicted high performance. In this work, we demonstrate a multilayer stackable process for M3D integration of high-performance aligned carbon nanotube (A-CNT) transistors and ICs. A low-kappa (similar to 3) interlayer SiO2 layer is prepared from spin-on-glass (SOG) through processes with a highest temperature of 220 C-degrees, presenting low parasitic capacitance between two transistor layers and excellent planarization to offer an ideal surface for the A-CNT and device fabrication process. A high-quality A-CNT film with a carrier mobility of 650 cm(2) V-1 s(-1) is prepared on the ILD layer through a clean transfer process, enabling the upper CNT FETs fabricated with a low-temperature process to exhibit high on-state current (1 mA mu m(-1)) and peak transconductance (0.98 mS mu m(-1)). The bottom A-CNT FETs maintain pristine high performance after undergoing the ILD growth and upper FET fabrication. As a result, 5-stage ring oscillators utilizing the M3D architecture show a gate propagation delay of 17 ps and an active region of approximately 100 mu m(2), representing the fastest and the most compact M3D ICs to date.

Carbon nanotube radio-frequency electronics

Carbon Nanotube Materials for Future Integrated Circuit Applications

Improving Carbon Nanotube-Based Radiofrequency Field-Effect Transistors by the Device Architecture and Doping Process.

Carbon Nanotube Electronics: Recent Advances

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Carbon‐Based Interconnects for RF Nanoelectronics

Carbon Nanotube Film-Based Radio Frequency Transistors with Maximum Oscillation Frequency above 100 GHz.

Carbon Nanotube Based Radio Frequency Transistors For K-Band Amplifiers

Aligned Carbon Nanotubes-Based Radiofrequency Transistors for Amplitude Amplification and Frequency Conversion at Millimeter Wave Band

CNTFET Technology for RF Applications: Review and Future Perspective

Radio-frequency Transmission Properties of Carbon Nanotubes in a Field-Effect Transistor Configuration

CNT Electronics: Advances in High‐Performance Carbon‐Nanotube Thin‐Film Electronics (adv. Electron. Mater. 8/2019)

Carbon Nanotube Network Film-Based Ring Oscillators with Sub 10-Ns Propagation Time and Their Applications in Radio-Frequency Signal Transmission

Carbon Based High Performance Doping-Free Nanoelectronic and Optoelectronic Devices

Terahertz metal-oxide-semiconductor transistors based on aligned carbon nanotube arrays

Carbon Nanotube Radiofrequency Transistors with F T/f MAX of 376/318 GHz

Device design and optimization of CNTFETs for high-frequency applications

Progress on a Carbon Nanotube Field-Effect Transistor Integrated Circuit: State of the Art, Challenges, and Evolution

Radiofrequency Transistors Based on Aligned Carbon Nanotube Arrays

Radio frequency analog electronics based on carbon nanotube transistors

Carbon Nanotube Technology For Solid State And Vacuum Electronics