Abstract:Ellipsoidal head is a common end closure of pressure vessel. Plastic collapse is a crucial failure mode considered in the design of ellipsoidal head subjected to internal pressure. Internally pressurized ellipsoidal head tends to be hemisphere (geometric strengthening) due to the effect of material hardening before plastic collapse occurs, which enhances load carrying capacity of ellipsoidal head. However, in the current pressure vessel codes such as ASME BPVC.VIII.1 and BPVC.VIII.2, EN 13445-3, and Chinese codes GB/T 150.3 and JB 4732, design methods based on linear elastic or perfectly-plastic theory are used to prevent plastic collapse of ellipsoidal head, leading to conservative design. Therefore, we developed a new method for preventing plastic collapse of ellipsoidal head under internal pressure, considering the effects of material hardening and geometric strengthening. The new method was developed on basis of our previous extensive work on finite element analysis and experiments for plastic collapse of internally pressurized ellipsoidal heads. The new method provides sufficient margin of safety by checking against the experimental bursting results of full-scale ellipsoidal heads with various geometries, various material types and various manufacturing methods. Compared with the design methods in the current pressure vessel codes, the new method shows an advantage of economy. This new method had been approved by China Standardization Committee on Boilers and Pressure Vessels, and at present it has been introduced into the Chinese pressure vessel code.

Zero Curvature Method and Protection Criterion Against Plastic Collapse

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

A New Protection Criterion Against Plastic Collapse

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

LOAD AND RESISTANCE FACTOR DESIGN OF DUAL CRITERION AGAINST GROSS PLASTIC DEFORMATION AND COLLAPSE

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

A Numerical Computation Method on Plastic Collapse Theorem

An Algorithm for Plastic Limit Analysis

Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings

Plastic Limit Load Analysis of Defective Pipelines

Collapse load computation of defective pipelines under multi-loading system

A 5% Maximum Principal Strain Criterion to Prevent Gross Plastic Deformation

A New Method for Preventing Plastic Collapse of Ellipsoidal Head under Internal Pressure

Plastic Limit Analysis of Defective Pipelines under Complex Loads

Dual Assessment Criterion and Its Programmed Application of Collapse Failure of Pressure Vessels

FINITE ELEMENT ANALYSIS OF PLASTIC LIMIT LOADS OF LOCALLY THINNED ELBOWS UNDER INTERNAL PRESSURE AND IN-PLANE BENDING MOMENT

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

A Numerical Approach for Lower Bound Limit Analysis

Plastic Collapse Analysis of Defective Pipelines under Multi-Loading Systems

Application Scope of Limit Load Criterion for Ductile Material Pipes with Circumferentially External Cracks