Abstract:Theoretical or numerical progressive collapse analysis is necessary for important civil structures in case of unforeseen accidents. However, currently, most analytical research is carried out under the assumption of material elasticity for problem simplification, leading to the deviation of analysis results from actual situations. On this account, a progressive collapse analysis procedure for truss structures is proposed, based on the assumption of elastoplastic materials. A plastic importance coefficient was defined to express the importance of truss members in the entire system. The plastic deformations of members were involved in the construction of local and global stiffness matrices. The conceptual removal of a member was adopted, and the impact of the member loss on the truss system was quantified by bearing capacity coefficients, which were subsequently used to calculate the plastic importance coefficients. The member failure occurred when its bearing capacity arrived at the ultimate value, instead of the elastic limit. The extra bearing capacity was embodied by additional virtual loads. The progressive collapse analysis was performed by iterations until the truss became a geometrically unstable system. After that, the critical progressive collapse path inside the truss system was found according to the failure sequence of the members. Lastly, the proposed method was verified against both analytical and experimental truss structures. The critical progressive collapse path of the experimental truss was found by the failure sequence of damaged members. The experimental observation agreed well with the corresponding analytical scenario, proving the method feasibility.

A Numerical Computation Method on Plastic Collapse Theorem

Improved Computational Method Based Upon Slip-line Field Theory For Passive Plies For Practical Use

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

An efficient adaptive polygonal finite element method for plastic collapse analysis of solids

Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings

A New Protection Criterion Against Plastic Collapse

Zero Curvature Method and Protection Criterion Against Plastic Collapse

Numerical analysis of concrete under a wide range of stress and with different saturation condition

Progressive Collapse Safety Evaluation of Truss Structures Considering Material Plasticity

An Algorithm for Plastic Limit Analysis

A dislocation-based finite element method for plastic collapse assessment in solid mechanics

Calculations of Plastic Collapse Load of Pressure Vessel Using FEA

Effect of Welding Residual Stress on Plastic Buckling of Axially Compressed Cylindrical Shells with Patterned Welds

Finite Element Analysis of Plastic Collapse and Crack Behavior of Steel Pressure Vessels and Piping Using XFEM

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

A Numerical Approach for Lower Bound Limit Analysis

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

A Simple Formula for Prediction of Plastic Collapse Pressure of Steel Ellipsoidal Heads under Internal Pressure

Plastic limit load and failure analyses of perforated materials

Plastic Limit Load Analysis of Defective Pipelines