Abstract:Abstract Aging pipelines may experience several different types of degradation, such as crack and corrosion, which pose serious concerns for the pipeline integrity. Hybrid flaws such as crack-in-corrosion (CIC), can be challenging to model and understand. For instance, predicting the failure pressure using the finite element method (FEM) is relatively difficult; therefore, the extended finite element method (XFEM) is introduced here. Compared to the conventional FEM, which requires extremely fine meshes and is impractical for modelling dynamic crack propagation, XFEM is computationally efficient as there is no need to update the mesh elements for tracking the crack path. This paper aims to study the applicability of XFEM in predicting the failure pressure of CIC defects in 2D. In particular, mesh size sensitivity and the effects of different CIC parameters on the final failure pressure were examined. ABAQUS v 6.14 was used for this simulation study. For simplicity, only half of the pipe was modelled assuming symmetry around the horizontal plane. A CIC defect was placed at the exterior of the pipe. The corroded area was assumed to be semi-elliptical, and the crack was simulated as a longitudinal crack. In this paper, failure criterion was satisfied when the crack has propagated to the last element. Several models were built in which the length and width of the elements at the crack tip were changed. An optimum mesh size was determined and was applied subsequently in several other models to study the impacts of crack depths, corroded area widths, and corrosion profiles. The results showed that when the total defect depth was fixed at 50% of the wall thickness, the failure pressure decreased with increasing the crack depth, while both corroded area width and corrosion profile only have a secondary effect on the failure pressure. In addition, the failure pressure of a CIC defect was bound between that of a crack-only defect and a corrosion-only defect. When the depth of the crack is higher than 50% of the total defect area, the CIC defect can be treated as a crack only defect with a crack depth equal to the total defect depth.

Finite Element Analysis of Plastic Collapse and Crack Behavior of Steel Pressure Vessels and Piping Using XFEM

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Calculations of Plastic Collapse Load of Pressure Vessel Using FEA

Simulation of Crack Propagation in API 5L X52 Pressurized Pipes Using XFEM-Based Cohesive Segment Approach

INVESTIGATION ON PLASTIC FAILURE LOAD OF PIPING BRANCH JUNCTIONS WITH CIRCUMFERENTIAL CRACKS

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Failure Pressure Prediction of Crack in Corrosion Defects in 2D by Using XFEM

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings

Empirical Correction Factor to Estimate the Plastic Collapse Bending Moment of Pipes with Circumferential Surface Flaw

Crack growth stability analysis method for LBB assessment technology in pressure vessels and pipes

Plastic Collapse Analysis of Defective Pipelines under Multi-Loading Systems

Numerical Investigation of Mixed-Mode Crack Growth in Ductile Material Using Elastic–plastic XFEM

Failure analysis of natural gas buried X65 steel pipeline under deflection load using finite element method

Finite Element Analysis on the Collapse Loads for Cracked Elbows under Internal Pressure

Engineering assessment method for LBB stability analysis in pressure vessels and pipes

FINITE ELEMENT ANALYSIS OF PLASTIC LIMIT LOADS OF LOCALLY THINNED ELBOWS UNDER INTERNAL PRESSURE AND IN-PLANE BENDING MOMENT

Plastic Limit Load Analysis of Defective Pipelines

Prediction of Slant Ductile Fracture Using Damage Plasticity Theory