Abstract:The J-integral solutions for cracked pipes are important in crack growth calculation and failure evaluation based on the elastic-plastic fracture mechanics. One of the most important crack types in structural integrity assessment for nuclear piping systems is circumferential semi-elliptical surface crack on the inside of the pipes. Although several J-integral solutions have been provided, no solutions were developed at both the deepest and the surface points of circumferential semi-elliptical surface cracks in pipes. In this study, with backgrounds described above, the J-integral solutions of circumferential semi-elliptical surface cracks on the inside of the pipe were developed by numerical finite element analyses. Three dimensional elastic-plastic analyses were performed considering different material properties, pipe sizes, crack dimensions and, especially, combined loading condition of internal pressure and bending moment which is a typical loading condition for nuclear piping systems. The J values at both the deepest and the surface points were extracted from finite element analysis results. Moreover, in order to benefit users in practical applications, a pair of convenient J-integral estimation equations were developed based on the calculated J values at the deepest and the surface points. Finally, the accuracy and applicability of the convenient equations were confirmed by comparing with the provided stress intensity factor solutions in elastic region and with finite element analysis results in elastic-plastic region.

Crack growth stability analysis method for LBB assessment technology in pressure vessels and pipes

Engineering assessment method for LBB stability analysis in pressure vessels and pipes

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

STUDIES ON THE VARIOUS ASSESSMENT THEORIES AND THEIR COMPUTATIONAL PRECISIONS USED TO LBB FRACTURE ANALYSIS OF PRESSURE VESSELS

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

A Simplified Leak-Before-break Analysis Method of Pressured Pipes

Safety analysis of pressure piping containing incomplete penetration under combined loads

Simplified leak-before-break analyzing method of pressure pipes

Buckle Propagation Analysis of Deep-Water Petroleum Transmission Pipelines with Axial Tension

Finite Element Analysis of Plastic Collapse and Crack Behavior of Steel Pressure Vessels and Piping Using XFEM

Study on tearing instability and plastic collapse under simple loading for circumferential cracks of pipes

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

Development of J-Integral Solutions for Semi-Elliptical Circumferential Cracked Pipes Subjected to Internal Pressure and Bending Moment

Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings

Empirical Solution of Stress Intensity Factors for the Inclined Inner Surface Crack of Pipe under External Pressure and Axial Compression

ICONE19-43138 Prediction of Failure Bending Moment for a Pipe Containing Multiple Circumferential Cracks with Complex Shapes

Effect Of Pressure On Plastic Collapse Under The Combined Bending And Torsion Moments For Circumferentially Surface Flawed Pipes

Calculations of Plastic Collapse Load of Pressure Vessel Using FEA