Abstract:Hot embossing is an efficient technology for the fabrication of glass micro- and nanostructures. However, the long cycle time, high energy consumption, and high nitrogen emissions in traditional hot embossing approach hinders sustainable production of glass micro-optics. Therefore, this paper proposes a novel two-stage gravity-assisted hot embossing process that enables the fabrication of high-quality glass micro-pillar arrays in a rapid, green manner. In this approach, the two-stage gravity loading unit provides accurate force on glass preform through a simple control system, and the tailor-made heating module based on Si 3 N 4 ceramic heaters requires an energy consumption of just 700 kJ per molding cycle. As a result, the proposed approach is featured by low energy consumption and high manufacturing efficiency. In this study, the effects of the embossing temperature, force, and time on the replication accuracy of a K9 glass micro-pillar array were investigated through a series of hot embossing experiments. Afterward, the form accuracy, uniformity of microstructures, and warpage of glass replicas under the optimal process parameters were evaluated separately. Finally, repeated hot embossing experiments were conducted to demonstrate the reproducibility of the hot embossing process. The experimental results show that embossing temperature had the most significant effect on the replication accuracy of glass micro-pillars. By optimizing the process parameters, the embossed glass micro-pillars could achieve transfer ratios of 99.00% and 95.14% in height and diameter, respectively. Moreover, the surface roughness of glass micro-pillars was less than 5 nm, and the warpage amplitude of glass replicas in a 3.9 × 3.9 mm area was smaller than 1 μm. The small discrepancy in geometric features of glass replica in the repeated trails reflects the satisfactory reproducibility of this hot embossing process on the micro and nano scales. The results indicate the strong industrialization potential of the proposed two-stage gravity-assisted hot embossing machine and hot embossing process for fabricating high-quality glass microstructures more cleanly and sustainably.

Induction-heated Nanoimprint on Soda-Lime Glass Using Sapphire Molds

Sustainable Fabrication of Glass Nanostructures Using Infrared Transparent Mold Assisted by CO2 Laser Scanning Irradiation

Glass nanoimprint using amorphous Ni–P mold etched by focused-ion beam

Microfabrication and Surface Functionalization of Soda Lime Glass through Direct Laser Interference Patterning

Thermal nanoimprint fabrication of chalcogenide glass waveguide resonators on nonconventional plastic substrates

Maskless Laser Nano-Lithography of Glass Through Sequential Activation of Multi-Threshold Ablation

Low-temperature fabrication of fine structures on glass using electrical nanoimprint and chemical etching

Fabrication of Cross-Sinusoidal Anti-Reflection Nanostructure on a Glass Substrate Using Imperfect Glass Imprinting with a Nano-Pin Array Vitreous Carbon Stamp

Study on nano-graphitic carbon coating on Si mold insert for precision glass molding

Single-step maskless nano-lithography on glass by femtosecond laser processing

Demonstration of High-Performance, Sub-Micron Chalcogenide Glass Photonic Devices by Thermal Nanoimprint

Large-scale Fabrication of Nanopatterned Sapphire Substrates by Annealing of Patterned Al Thin Films by Soft UV-nanoimprint Lithography

Glass etching to bridge micro- and nanofluidics.

Direct Femtosecond Laser Nanopatterning of Glass Substrate by Particle-Assisted Near-Field Enhancement

Surface nanostructuring of alkali-aluminosilicate Gorilla display glass substrates using a maskless process

Femtosecond pulsed laser micro-machining of glass substrates with application to microfluidic devices

Large Area Direct Nanoimprinting of SiO2–TiO2 Gel Gratings for Optical Applications

Direct Femtosecond Laser Processing for Generating High Spatial Frequency LIPSS (HSFL) on Borosilicate Glasses with Large-Area Coverage

Glass biochip fabrication by laser micromachining and glass-molding process

A novel hot embossing process for producing high-quality glass micro-pillar arrays