Abstract:Amorphous SiBCN ceramics are a unique class of structure materials with potential applicationsas high-temperature heat-resistant structural components owing to their combination of special structure and properties of low specific weight, high specific strength and excellent damage tolerance at elevated temperatures. However, it is still in need for further mechanical properties improvements for actual demands by rational co-design of architecture and chemistry as well as understanding the basic features of morphological/microstructural evolution and failure behavior. Thus in this attempt, to target the dense amorphous Si2ByC2N (y=1.5～4) monoliths with high mechanical properties, an attractive way of combinatorial mechanical alloying and high-pressure sintering technique (1000 oC/3～5 GPa/30 min) was proposed using elemental powders of graphite, hexagonal BN, cubic Si and boron as raw materials. The sintering pressure induced microstructural evolution, phase transformation and thermal stability have been investigated by XRD, SEM, TEM and TG measurements, and mechanical performance, especially the fracture behavior was also discussed in details. Results clearly presented that an increase in sintering pressure promoted the phase transformation of completely amorphous matrix to a hybrid structure of substantial amorphous phases and few nanocrystals of metal c-Si and/or t-BN(C) for some monoliths, implying boron-content depending phase composition. High-pressure sintering effectively promoted the densification leading to free volume annihilation and the river-like fracture morphology occurrence. A monotonous increase of the bulk density, nano hardness and Young's modulus as a function of the sintering pressure was observed. Under the same sintering conditions, the increase in boron content weakened the mechanical properties and thermal stability of the amorphous Si2ByC2N (y=1.5～4) monoliths. Dense amorphous Si2B1.5C2N monoliths consolidated at 1000 oC/5 GPa/30 min showed the best performance with the bulk density, nano hardness and Young's modulus obtaining at 2.69 g/cm3, 33.6±2.2 GPa and 414.2±16.5 GPa, respectively.

Si-B-C-N Monoliths with Lab6-Induced Well-Developed Bn(C) Flakes

Densification, Microstructural Evolution and Mechanical Properties of Si-B-C-N Monoliths with LaB6 Addition

Microstructural Evolution, Mechanical and Thermal Properties of LaB6 Embedded in Si-B-C-N Prepared by Spark Plasma Sintering

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Role of boron addition on phase composition, microstructural evolution and mechanical properties of nanocrystalline SiBCN monoliths

Carbon‐content‐dependent Phase Composition, Microstructural Evolution, and Mechanical Properties of SiBCN Monoliths

Effects of additives to Si3N4 matrix on microstructure and properties of laminated Si3N4/BN ceramics

Effects of Additive to Bn Interlayers on Microstructure and Properties of Laminated Si3n4/Bn Ceramics

Crystallization Behavior of Amorphous Si2bc3n Ceramic Monolith Subjected to High Pressure

Boron‐dependent Microstructural Evolution, Thermal Stability, and Crystallization of Mechanical Alloying Derived SiBCN

Microstructural Features and Properties of the Nano-Crystalline SiC/BN(C) Composite Ceramic Prepared from the Mechanically Alloyed SiBCN Powder

Processing and Characterization of SiB0.5C1.5N0.5 Produced by Mechanical Alloying and Subsequent Spark Plasma Sintering

Microstructural evolution and mechanical performance of high-pressure sintered dense amorphous SiBCN monoliths

Fabrication of Dense SiBCN Monolith at a Lower Temperature Andits High-Temperature Performance

Enhanced Strengths and Thermal Shock Resistance of SiC-BN-10 Vol% Cf Composites Through ZrB2 Addition

Highly Dense Amorphous Si2bc3n Monoliths with Excellent Mechanical Properties Prepared by High Pressure Sintering

High‐Pressure Synthesis of Amorphous Si3N4 and SiBN‐based Monoliths Without Sintering Additives

Precipitation of BN crystals in SiBON ceramics and its mechanical properties

Pressureless solid-state sintering of SiC ceramics with BN and C additives

Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics